Attwood SWIVL-EZE LakeSport 2-3/8" Seat Mount w/Friction Control - Aluminum [818440]

SWIVL-EZE LakeSport 2-3/8" Seat Mount with Friction Control - AluminumLakeSport Seat Mount is 2-3/8 inch Locking AO-Aluminum, with Friction Control,...

Attwood SWIVL-EZE LockN-Pin 3/4" Pedestal Kit 13" Post 7" x 7"

• Includes 7" x 7" stainless steel threaded base plate, black E-coated seat mount and 13" high...
• The 3/4" system gives you outstanding economical performance
• Great for adding seating to fishing, pontoon or cruising boats
• Lock'N-Pin products meet ABYC Standard

Attwood Swivl-Eze LockN-Pin 3/4" Pin Seat Mount - Zinc Coated [SP-1002]

• Zinc-plated
• Tilt: 3 degrees
• Pin (inch): 2-3/4" Steel Pin with Spring
• ABYC Code: B (not to be used at the helm/driver position)

Attwood Swivl-Eze Low Back Padded Flip Seat - Grey [98395GY]

• Dimensions (inch): 15" Wide x 16" depth x 16" height
• Color: Grey
• ABYC Code: B (not to be used at the helm/driver position)

Attwood Swivl-Eze Pedestal 13" [91320]

• 13 inches tall
• Exceptional durability
• Reinforced
• Black powder coated for a long-lasting finish

Attwood Swivl-Eze Seat Swivel 7" Black w/3 Tilt [17721]

• 360° ball-bearing seat swivel (requires weight or pressure to turn)
• 5-1/4" universal mounting hole pattern
• Tilt Angle: 0°
• Black powder coat finish

Attwood Trailer Bunk Padding - 8" x 12' [11246-1]

• Acrylic backing grips surface
• Made for minor water retention
• Charcoal color

Attwood Trailer Bunk Padding 12" x 12 [11247-1]

• 12 inches wide
• Protects hull 
• Eases loading and launching 
• Charcoal color

Attwood Trolling Motor Quick Connectors [14367-6]

• Replaces battery clips
• 2-connector kit
• Safe and easy
• Semi-gloss finish

Attwood Universal Aluminum Fuel Hose Fitting - 3/8" NPT x 3/8" Barb

• Fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels
• Material Construction: Aluminum
• Male thread, hose barb
• (inch) Male 3/8" NPT x 3/8" Barb 

Attwood Universal Brass Fuel Hose Fitting - 1/4" NPT x 3/8" Barb

• Fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels
• Material Construction: Brass
• Male thread, hose barb
• (inch) Male 1/4" NPT x 3/8" Barb 

Attwood Universal Fuel Line Kit - 3/8" Dia. x 6 Length w/Sprayless

• These Attwood Fittings Are Included: Tank fitting 8838TM6 & tank end hose fitting 8838HF6
• Also, includes a Fuel Demand Value that eliminates engine flooding and spillage by preventing pressurized fuel...
• Tank Side: Universal Sprayless Quick-Connect
• Universal for any Engines and Tanks

Attwood Universal Fuel Line Kit - 3/8" Diameter x 6 Length [93806ULP7]

• 3/8" x 6' Low Permeation Hose
• Universal for any engines and tanks
• Multi-layer low-permeation primer bulb with 60% more fuel output compared to competitors
• Reliably delivers fuel to your engine

Attwood Universal Fuel Line Kit - 5/16" Diameter x 6 Length

• This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines.
• Universal for any engines and tanks
• Multi-Layer, Low-Permeation Primer Bulb
• 6 ft. x 5/16 in. Low Permeation Hose

Attwood Universal Fuel/Water Separator Kit w/Bracket [11840-7]

• 10 Micron Filter and bracket included
• Outfitted with 2 brass plugs for secure connections and universal 3/8 inch (.85cm) ports
• Double seal for enhanced performance
• Replaces Mercury 35-60494A4

Attwood Universal Sprayless Connector - Hose Female (5/16"-3/8")

• Female hose fitting compatible with 3/8" and 5/16" fuel lines
• Includes check valves that automatically close upon disconnecting
• High fuel flow fitting (less than .25kPa restriction at 50 liters/hour)
• Reliably eliminates fuel spraying when connecting and disconnecting the fuel hose

Attwood Universal Sprayless Connector - Male Female [8838US6]

• 8838HF6 Female Hose Fitting and 8838TM6 Male Threaded Tank Fitting
• Pre-applied fuel-grade thread sealant prevents fuel leaks
• Include check valves that automatically close upon disconnecting
• High fuel flow fitting (less than .25kPa restriction at 50 liters/hour)

Attwood Vertical, Flush Mount Transom Light - Round [6356D7]

• 3" Diameter
• Lens Color: White
• Visible Range (Miles): 2nm
• Housing: Stainless

Attwood White LED Micro Light w/Stainless Steel Bezel Vertical Mount

•  0.66-watt draw at 12 volts DC
• White LEDs
• Rated for 50,000+ hours of use
• Bulb Type: LED

Attwood Yamaha Female Hose Fitting - Tank Or Engine End - 5/16" Barb [88FHY516-6]

• Yamaha fitting
• Tank or Engine End
• Material Construction: Acetal

Attwood Yamaha Fuel Line Kit 6 x 3/8" [93806YUS7]

• Includes Attwood's award-winning Universal Sprayless Connector; no more dangerous fuel sprays when connecting and disconnecting pressurized...
• Multi-layer low-permeation primer bulb with 60% more fuel output compared to competitors
• Includes 3/8-inch low-permeation fuel hose that resists kinking and hardening; rated up to 100 degrees Centigrade
• Versatile: compatible with Ethanol blended fuels, Yamaha Brand engines and tanks

Attwood Yamaha Tank Fitting - 1/4" NPT Thread [8897-6]

• Quick-connect 1/4-inch male thread makes installation easy
• Solid machined brass for dependable performance and peace of mind
• Designed for Yamaha and select Mercury/Mariner brand engines that use leaded, unleaded, and alcohol-blended fuel

ATV-TEK Elite Series Neoprene Dust Mask-black - Dust Masks

• Direct replacement — OEM Part #EDMBLK
• Weight: 0.5 lbs
• Dimensions: 12 × 9 × 3.5 in
• Made in China

ATV-TEK Elite Series Neoprene Dust Mask-tan - Dust Masks

• Direct replacement — OEM Part #EDMTAN
• Weight: 0.5 lbs
• Dimensions: 12 × 9 × 3.5 in
• Made in China