Blue Sea 1015 12V DC Plug & Dash Socket (1010 & 1011) [1015]

• Plug has a moisture proof sealing ring around the shaft to keep out spray and make...
• Plug features an "ON" indicating LED, moisture proof sealing ring, strain relief, and a built-in 10...
• Socket features a watertight cap, easy installation and interlocks with the plug
• Designed to withstand the rigors of wet environments and constant vibration

Blue Sea 8110 Mini Clamp Multimeter [8110]

• Clamp allows measurement of AC and DC current in wires without disturbing the circuits or contacting...
• Auto range simplifies operation: 0.01-400 Amps, 0.001-600 Volts
• Auto power-off selection - power turns off automatically after 10 minutes of non-use
• True RMS - required for accurate measurement of inverter output

Blue Sea 2713 Minibus Cover [2713]

Cover for 2304 and 2305Great for limited space applicationsBase Material: Reinforced PolycarbonateCover Material: Clear PolycarbonateContinuous Amperage: 100 Amperes AC/DCVoltage Rating:...

Blue Sea 7650 Add-A-Battery [7650]

• A complete two battery bank management solution
• Dual Circuit Plus™ Battery Switch isolates engine and house circuits, and combines battery banks for emergency...
• The 120 Amp SI ACR automatic charging relay combines for charging
• Positions: 1

Blue Sea 2716 Cover f/BusBar 2302 [2716]

• The industry standard busbar for positive distribution
• The industry standard busbar for the collection of negative or AC ground circuits

Blue Sea 2315 MiniBus 100 Ampere Common BusBar 4 x 10-32 Stud Terminal with Cover [2315]

• Great for limited space applications in electronics cabinets and under dashboards
• Snap on insulating cover attaches to studs and allows unobstructed wire access
• Raised bus provides easy access to multiple wires on a single screw
• Pressed on busbar eliminates the need for a securing nut

Blue Sea 2314 MiniBus 100 Ampere Common BusBar 5 x 8-32 Screw Terminal with Cover [2314]

• Great for limited space applications in electronics cabinets and under dashboards
• Snap on insulating cover attaches to studs and allows unobstructed wire access
• Raised bus provides easy access to multiple wires on a single screw
• Pressed on busbar eliminates the need for securing nut

Blue Sea 2312, 150 Ampere Common Busbar 20 x 8-32 Screw Terminal with Cover [2312]

• Stud design provides direct terminal to bus contact for low resistant connection
• Stainless steel studs and screws allow high torquing for excellent electrical contact
• Tin-plated copper bus for maximum conductivity and resistance to corrosion
• UL 94-VO rated (self extinguishing) base material resists high heat

Blue Sea 6006 m-Series (Mini) Battery Switch Single Circuit ON/OFF Red [6006]

• Switches a single battery to a single load group
• Multiple switches can be used to manage several isolated circuits including cross conntecting for emergency paralleling
• Ignition protected - Safe for installation aboard gasoline powered boats
• Case design allows surface, front panel, or rear panel mounting

Blue Sea 6005 m-Series (Mini) Battery Switch Single Circuit ON/OFF [6005]

• Switches a single battery to a single load group
• Multiple switches can be used to manage several isolated circuits including cross connecting for emergency paralleling
• Ignition protected - Safe for installation aboard gasoline powered boats
• Case design allows surface, front panel, or rear panel mounting

Blue Sea 7250I C-Series Ignition Protected Toggle Single Pole - 100A [7250I]

• Ignition Protected
• Provides overcurrent protection for inverters, bow thrusters, and windlasses
• Combines switching and circuit protection into a single device
• "Trip Free" - cannot be held closed after trip

Blue Sea 5511e e-Series Dual Circuit Plus Battery Switch [5511E]

• CE Marked
• Ignition protected - Safe for installation aboard gasoline powered boats
• Case design allows surface or rear panel mounting
• Meets American Boat and Yacht Council (ABYC) requirements for battery switches

Blue Sea 5510E e-Series Dual Circuit Battery Switch [5510E]

• CE Marked
• Ignition protected - Safe for installation aboard gasoline powered boats
• Case design allows surface or rear panel mounting
• Meets American Boat and Yacht Council (ABYC) requirements for battery switches

Blue Sea 9630 AC Analog Ammeter 0-50 Amperes AC [9630]

• Simple 2-wire connection
• Meter senses and powers from coil slipped over wire to be measured
• Includes AC current transformer
• Backlit meter face

Blue Sea 9354 AC Analog Voltmeter 0-250 Volts AC [9354]

• Dial Marked in 5 Volt increments
• Simple 2-wire connection to AC hot and neutral
• Meter senses and powers from same connection

Blue Sea 9233 Analog Meter Shunt 200A/50mV [9233]

• For us with DC Ammeters
• For continuous operation, it is recommended that shunts not to be run at more than two-thirds...

Blue Sea 9230 Analog Meter Shunt 100A/50mV [9230]

• For use with DC Ammeters
• For continuous operation, it is recommended that shunts not to be run at more than two-thirds...

Blue Sea 9228 Analog Meter Shunt 50A/50mV [9228]

• For use with DC Ammeters
• For continuous operation, it is recommended that shunts not be run at more than two-thirds (66%)...

Blue Sea 9077 Switch, AC 240VAC 63A OFF +3 Positions [9077]

• Switches 3 - 120/240 Volt AC sources
• Switches both lines (hot) and neutral
• Compact solution when circuit protection is provided elsewhere
• Allows connecting one of two different AC sources to one circuit

Blue Sea 9019 Switch, AC 240VAC 63A OFF +2 Positions [9019]

• Switches 2 - 120/240 Volt AC sources
• Compact solution when circuit protection is provided elsewhere
• Allows connecting one of two different AC sources to one circuit
• Mounts in panels up to 0.16" (4.00mm) thick

Blue Sea 9011 Switch, AV 120VAC 65A OFF +2 Positions [9011]

• Switches 2 - 120 or 230 Volt AC sources
• Compact solution when circuit protection is provided elsewhere
• Allows connecting one of two different AC sources to one circuit
• Mounts in panels up to 0.16" (4.00mm) thick

Blue Sea 9010 Switch, AV 120VAC 32A OFF +3 Positions [9010]

• Switches 2 - 120 or 230 Volt AC sources
• Compact solution when circuit protection is provided elsewhere
• Allows connecting one of two different AC sources to one circuit
• Mounts in panels up to 0.16" (4.00mm) thick