-
Newmar Power
Newmar PT-25W Battery Charger [PT-25W]
Free Shipping on $199+Regular price $1,062.00Sale price $1,062.00 Regular price $0.00Unit price perIn Stock
More info
- 12-volt model
- “Smart” circuitry provides three-stage charging – bulk, absorption, and float
- Gel-Cell/Flooded Lead-acid/AGM battery type switch selects optimum charge/float voltages
- Multiple isolated output banks; ammeter indicates total output current. (Except PT-7)
- The optional sensor adjusts the output voltage based on battery temperature. (Except PT-7)
- Current limitations prevent damage from overloading
- Clean well-regulated output can be used as a power supply; can power loads directly without a battery in line
- Built to last – rugged stainless steel case with a durable white powder coat finish, an optional drip shield, and marinized internal circuitry
- Protection: Current Limiting, Thermal Protection, Forced Air Cooling, Drip Shield
- ABS-type approval for battery charging and power supplies
- Input VAC (50-60 Hz.): 90-132 or 180-264
- Input Amps @ Full Load: @ 115 VAC: 6.5, @ 230 VAC: 4
- Power Factor: .7
- Max Output Amps: 25
- Output Banks: 3
- Battery Capacity (Amp-Hours): 50-250
- Operating Temp. Rating Reference: T-4
- Case Size Reference: A-2
- Case Size (H x W x D): 11.2A x 7.7 x 4.75A inches (31.8A x 19.6 x 12.1A centimeters) *Note with Dripshield installed A add 1.1” (2.8 cm) to height and .92” (2.3 cm) to depth
- Weight Lbs./Kg: 8.2/4
- Optional Temp. Sensor Model: TCS-12/24
- Remote Panel Model: RP
- Equalize Option: Yes
- Output Indicator Reference: M-3
- Compliance Reference: CG
- Temperature: -20 degrees C to +60 degrees C
- Derate Linearly From 100% @ 50 degrees C to 60% @ 60 degrees C
- Gel-Cell: 14.0 VDC Charge @ 50% load and 13.6 VDC Float @ .5 amp load
- Flooded/AGM: 14.2 VDC Charge @ 50% load and 13.4 VDC Float @ .5 amp load
- CG: USCG CFR 183.410 (Ignition protected)
- CE: Carries the CE mark
- ABS: PT Series meets SVR 2009 4-8-3/5.9, Under 90 meters Rules 2006 4-6-4/7.19, and HSNC 2007 4-8-3/5.13.
- Temperature Compensation Sensor, Model TCS 12/24, for use with all models except PT 7 (-5 mV per cell degrees C, 25′ cable (40’cable optional)
- Charger Input - Voltage: 115/230v
- Charger Output - Amps: 25a
- Charger Output Voltage: 12v
- Charging Banks: 3
- Portable: No
- Inverter Input Voltage: 115/230v
- Inverter Output Voltage: 12v
- Outlet Qty: Hardwire
- Box Dimensions: 10"H x 10"W x 16"L WT: 9.5 lbs
Newmar PowerNewmar PT-25W Battery Charger [PT-25W]
Code: ORA-102334Brand: Newmar PowerIn StockRegular price $1,062.00Sale price $1,062.00 Regular price $0.00Unit price per- 12-volt model
- “Smart” circuitry provides three-stage charging – bulk, absorption, and float
- Gel-Cell/Flooded Lead-acid/AGM battery type switch selects optimum charge/float voltages
- Multiple isolated output banks; ammeter indicates total output current. (Except PT-7)
-
Newmar Power
Newmar PT-24-95U Battery Charger [PT-24-95U]
Free Shipping on $199+Regular price $4,243.00Sale price $4,243.00 Regular price $0.00Unit price perLow Stock — Only 6 Left
More info
- 24-volt model
- “Smart” circuitry provides three-stage charging – bulk, absorption, float
- Gel-Cell/Flooded Lead-acid/AGM battery type switch selects optimum charge/float voltages
- Multiple isolated output banks; ammeter indicates total output current
- The optional sensor adjusts output voltage based on battery temperature
- Current limiting prevents damage from overloading
- Use as a power supply; can power loads without a battery in line
- Built to last – rugged stainless steel case with a durable white powder coat finish with an optional drip shield and marinized internal circuitry
- Protection: Current Limiting, Thermal Protection, Forced Air Cooling, Drip Shield
- Install in conjunction with PT-MCU for additional control and monitoring
- ABS-type approval for battery charging and power supplies
- Input VAC (50-60 Hz.): 90-264
- Input Amps @ Full Load: @ 115 VAC: 26, @ 230 VAC: 14
- Power Factor: .98@115V and .95@230V
- Max Output Amps: 95
- Output Banks: 3
- Battery Capacity (Amp-Hours): 180 – 950
- Operating Temp. Rating Reference: T-5
- Case Size Reference: A-5
- Case Size (H x W x D): 17.5E x 12 x 7.2E inches (44.5E x 30.5 x 18.3E centimeters) *Note with Dripshield installed E add 2” (5.08 cm) to height and 1” (2.54 cm) to depth
- Weight Lbs./Kg: 24.5/11
- Optional Temp. Sensor Model: TCS-12/24
- Remote Panel Model: RP
- Compliance Reference: EN, CE, ABS
- Temperature: -20 degrees C to +70 degrees C
- Derate Linearly From 100% @ 50 degrees C to 50% @ 70 degrees C
- Gel-Cell: 28.0 VDC Charge @ 50% load and 27.2 VDC Float @ .5 amp load
- Flooded/AGM: 28.4 VDC Charge @ 50% load and 26.8 VDC Float @ .5 amp load
- UL: UL 1950 (per DNB report)
- CG: USCG CFR 183.410 (Ignition protected)
- EN: EN 60335-1
- CE: Carries the CE mark
- ABS: PT Series meets SVR 2009 4-8-3/5.9, Under 90 meters Rules 2006 4-6-4/7.19, and HSNC 2007 4-8-3/5.13.
- Charger Input - Voltage: 115/230v
- Charger Output - Amps: 95a
- Charger Output Voltage: 24v
- Charging Banks: 3
- Portable: No
- Inverter Input Voltage: 115/230v
- Inverter Output Voltage: 24v
- Outlet Qty: Hardwire
- Box Dimensions: 12"H x 17"W x 25"L WT: 31.5 lbs
Newmar PowerNewmar PT-24-95U Battery Charger [PT-24-95U]
Code: ORA-102333Brand: Newmar PowerLow Stock — Only 6 LeftRegular price $4,243.00Sale price $4,243.00 Regular price $0.00Unit price per- 24-volt model
- “Smart” circuitry provides three-stage charging – bulk, absorption, float
- Gel-Cell/Flooded Lead-acid/AGM battery type switch selects optimum charge/float voltages
- Multiple isolated output banks; ammeter indicates total output current
-
Newmar Power
Newmar PT-24-8W Battery Charger [PT-24-8W]
Free Shipping on $199+Regular price $1,135.00Sale price $1,135.00 Regular price $0.00Unit price perLow Stock — Only 7 Left
More info
- 24-volt model
- “Smart” circuitry provides three-stage charging – bulk, absorption, float
- Gel-Cell/Flooded Lead-acid/AGM battery type switch selects optimum charge/float voltages
- Multiple isolated output banks; ammeter indicates total output current
- The optional sensor adjusts output voltage based on battery temperature
- Current limiting prevents damage from overloading
- Use as a power supply; can power loads without a battery in line
- Built to last – rugged stainless steel case with a durable white powder coat finish with an optional drip shield and marinized internal circuitry
- Protection: Current Limiting, Thermal Protection, Forced Air Cooling, Drip Shield
- Install in conjunction with PT-MCU for additional control and monitoring
- ABS-type approval for battery charging and power supplies
- Input VAC (50-60 Hz.): 85 – 264
- Input Amps @ Full Load: @ 115 VAC: 2.8, @ 230 VAC: 1.4
- Power Factor: .98@115V and .93@230V
- Max Output Amps: 8
- Output Banks: 3
- Battery Capacity (Amp-Hours): 16 – 80
- Operating Temp. Rating Reference: T-1
- Case Size Reference: A-1
- Case Size (H x W x D): 11.2A x 7.7 x 4.75A inches (28.4A x 19.6 x 12.1A centimeters) *Note with Dripshield installed A add 1.1” (2.8 cm) to height and .92” (2.3 cm) to depth
- Weight Lbs./Kg: 8/4
- Optional Temp. Sensor Model: TCS-12/24
- Remote Panel Model: RP
- Compliance Reference: CG, CE, ABS
- Temperature: -10 degrees C to +60 degrees C
- Derate Linearly From 100% @ 40 degrees C to 60% @ 60 degrees C
- Gel-Cell: 28.0 VDC Charge @ 50% load and 27.2 VDC Float @ .5 amp load
- Flooded/AGM: 28.4 VDC Charge @ 50% load and 26.8 VDC Float @ .5 amp load
- UL: UL 1950 (per DNB report)
- CG: USCG CFR 183.410 (Ignition protected)
- EN: EN 60335-1
- CE: Carries the CE mark
- ABS: PT Series meets SVR 2009 4-8-3/5.9, Under 90 meters Rules 2006 4-6-4/7.19, and HSNC 2007 4-8-3/5.13.
- Charger Input - Voltage: 115/230v
- Charger Output - Amps: 8a
- Charger Output Voltage: 24v
- Charging Banks: 3
- Portable: No
- Inverter Input Voltage: 115/230v
- Inverter Output Voltage: 24v
- Outlet Qty: Hardwire
- Box Dimensions: 10"H x 10"W x 16"L WT: 8.3 lbs
Newmar PowerNewmar PT-24-8W Battery Charger [PT-24-8W]
Code: ORA-102332Brand: Newmar PowerLow Stock — Only 7 LeftRegular price $1,135.00Sale price $1,135.00 Regular price $0.00Unit price per- 24-volt model
- “Smart” circuitry provides three-stage charging – bulk, absorption, float
- Gel-Cell/Flooded Lead-acid/AGM battery type switch selects optimum charge/float voltages
- Multiple isolated output banks; ammeter indicates total output current
-
Newmar Power
Newmar PT-24-45U Battery Charger [PT-24-45U]
Free Shipping on $199+Regular price $2,712.00Sale price $2,712.00 Regular price $0.00Unit price perIn Stock
More info
- 24-volt model
- “Smart” circuitry provides three-stage charging – bulk, absorption, float
- Gel-Cell/Flooded Lead-acid/AGM battery type switch selects optimum charge/float voltages
- Multiple isolated output banks; ammeter indicates total output current
- The optional sensor adjusts output voltage based on battery temperature
- Current limiting prevents damage from overloading
- Use as a power supply; can power loads without a battery in line
- Built to last – rugged stainless steel case with a durable white powder coat finish with an optional drip shield and marinized internal circuitry
- Protection: Current Limiting, Thermal Protection, Forced Air Cooling, Drip Shield
- Install in conjunction with PT-MCU for additional control and monitoring
- ABS-type approval for battery charging and power supplies
- Input VAC (50-60 Hz.): 90 – 264
- Input Amps @ Full Load: @ 115 VAC: 12, @ 230 VAC: 7
- Power Factor: .98@115V and .95@230V
- Max Output Amps: 45
- Output Banks: 3
- Battery Capacity (Amp-Hours): 90 – 450
- Operating Temp. Rating Reference: T-5
- Case Size Reference: A-4
- Case Size (H x W x D): 14.8B x 9.6 x 5.6D inches (37.6D x 24.4 x 14.2D centimeters) *Note with Dripshield installed D add 1” (2.54 cm) to height and .5” (1.2 cm) to depth
- Weight Lbs./Kg: 12/6
- Optional Temp. Sensor Model: TCS-12/24
- Remote Panel Model: RP
- Compliance Reference: EN, CE, ABS
- Temperature: -20 degrees C to +70 degrees C
- Derate Linearly From 100% @ 50 degrees C to 50% @ 70 degrees C
- Gel-Cell: 28.0 VDC Charge @ 50% load and 27.2 VDC Float @ .5 amp load
- Flooded/AGM: 28.4 VDC Charge @ 50% load and 26.8 VDC Float @ .5 amp load
- UL: UL 1950 (per DNB report)
- CG: USCG CFR 183.410 (Ignition protected)
- EN: EN 60335-1
- CE: Carries the CE mark
- ABS: PT Series meets SVR 2009 4-8-3/5.9, Under 90 meters Rules 2006 4-6-4/7.19, and HSNC 2007 4-8-3/5.13.
- Charger Input - Voltage: 115/230v
- Charger Output - Amps: 45a
- Charger Output Voltage: 24v
- Charging Banks: 3
- Portable: No
- Inverter Input Voltage: 115/230v
- Inverter Output Voltage: 24v
- Outlet Qty: Hardwire
- Box Dimensions: 10"H x 14"W x 20"L WT: 18 lbs
Newmar PowerNewmar PT-24-45U Battery Charger [PT-24-45U]
Code: ORA-102330Brand: Newmar PowerIn StockRegular price $2,712.00Sale price $2,712.00 Regular price $0.00Unit price per- 24-volt model
- “Smart” circuitry provides three-stage charging – bulk, absorption, float
- Gel-Cell/Flooded Lead-acid/AGM battery type switch selects optimum charge/float voltages
- Multiple isolated output banks; ammeter indicates total output current
-
Newmar Power
Newmar PT-24-20U Battery Charger [PT-24-20U]
Free Shipping on $199+Regular price $1,657.00Sale price $1,657.00 Regular price $0.00Unit price perIn Stock
More info
- 24-volt model
- “Smart” circuitry provides three-stage charging – bulk, absorption, float
- Gel-cell/Flooded Lead-acid/AGM battery type switch selects optimum charge/float voltages
- Multiple isolated output banks; ammeter indicates total output current
- The optional sensor adjusts output voltage based on battery temperature
- Current limiting prevents damage from overloading
- Use as a power supply; can power loads without a battery in line
- Built to last – rugged stainless steel case with a durable white powder coat finish with an optional drip shield and marinized internal circuitry
- Protection: Current Limiting, Thermal Protection, Forced Air Cooling, Drip Shield
- Install in conjunction with PT-MCU for additional control and monitoring
- ABS-type approval for battery charging and power supplies
- Input VAC (50-60 Hz.): 85 – 135, 170 – 270
- Input Amps @ Full Load: @ 115 VAC: 6.8, @ 230 VAC: 4.3
- Power Factor: .7
- Max Output Amps: 20
- Output Banks: 3
- Battery Capacity (Amp-Hours): 40– 200
- Operating Temp. Rating Reference: T-3
- Case Size Reference: A-2
- Case Size (H x W x D): 13.85B x 9.5 x 4.8B inches (35.2B x 24.1 x 12.2B centimeters) *Note with Dripshield installed B add .75” (1.9 cm) to height and 1.35” (3.4 cm) to depth
- Weight Lbs./Kg: 12/6
- Optional Temp. Sensor Model: TCS-12/24
- Remote Panel Model: NA
- Compliance Reference: CG, ABS
- Temperature: -20 degrees C to +60 degrees C
- Derate Linearly From 100% @ 50 degrees C to 60% @ 60 degrees C
- Gel-Cell: 28.0 VDC Charge @ 50% load and 27.2 VDC Float @ .5 amp load
- Flooded/AGM: 28.4 VDC Charge @ 50% load and 26.8 VDC Float @ .5 amp load
- UL: UL 1950 (per DNB report)
- CG: USCG CFR 183.410 (Ignition protected)
- EN: EN 60335-1
- CE: Carries the CE mark
- ABS: PT Series meets SVR 2009 4-8-3/5.9, Under 90 meters Rules 2006 4-6-4/7.19, and HSNC 2007 4-8-3/5.13.
- Charger Input - Voltage: 115/230v
- Charger Output - Amps: 20a
- Charger Output Voltage: 24v
- Charging Banks: 3
- Portable: No
- Inverter Input Voltage: 115/230v
- Inverter Output Voltage: 24v
- Outlet Qty: Hardwire
- Box Dimensions: 11"H x 15"W x 20"L WT: 14.3 lbs
Newmar PowerNewmar PT-24-20U Battery Charger [PT-24-20U]
Code: ORA-102329Brand: Newmar PowerIn StockRegular price $1,657.00Sale price $1,657.00 Regular price $0.00Unit price per- 24-volt model
- “Smart” circuitry provides three-stage charging – bulk, absorption, float
- Gel-cell/Flooded Lead-acid/AGM battery type switch selects optimum charge/float voltages
- Multiple isolated output banks; ammeter indicates total output current
-
Newmar Power
Newmar PT-24-13W Battery Charger [PT-24-13W]
Free Shipping on $199+Regular price $1,073.00Sale price $1,073.00 Regular price $0.00Unit price perLow Stock — Only 6 Left
More info
- 24-volt model
- “Smart” circuitry provides three-stage charging – bulk, absorption, float
- Gel-Cell/Flooded Lead-acid/AGM battery type switch selects optimum charge/float voltages
- Multiple isolated output banks; ammeter indicates total output current
- The optional sensor adjusts output voltage based on battery temperature
- Current limiting prevents damage from overloading
- Use as a power supply; can power loads without a battery in line
- Built to last – rugged stainless steel case with a durable white powder coat finish with an optional drip shield and marinized internal circuitry
- Protection: Current Limiting, Thermal Protection, Forced Air Cooling, Drip Shield
- Install in conjunction with PT-MCU for additional control and monitoring
- ABS-type approval for battery charging and power supplies
- Input VAC (50-60 Hz.): 90 – 132, 180 – 264
- Input Amps @ Full Load: @ 115 VAC: 6.5, @ 230 VAC: 4
- Power Factor: .7
- Max Output Amps: 13
- Output Banks: 3
- Battery Capacity (Amp-Hours): 26 – 130
- Operating Temp. Rating Reference: T-2
- Case Size Reference: A-1
- Case Size (H x W x D): 11.2A x 7.7 x 4.75A inches (28.4A x 19.6 x 12.1A centimeters) *Note with Dripshield installed A add 1.1” (2.8 cm) to height and .92” (2.3 cm) to depth
- Weight Lbs./Kg: 8/4
- Optional Temp. Sensor Model: TCS-12/24
- Remote Panel Model: RP
- Compliance Reference: CG, ABS
- Temperature: -10 degrees C to +60 degrees C
- Derate Linearly From 100% @ 50 degrees C to 60% @ 60 degrees C
- Gel-Cell: 28.0 VDC Charge @ 50% load and 27.2 VDC Float @ .5 amp load
- Flooded/AGM: 28.4 VDC Charge @ 50% load and 26.8 VDC Float @ .5 amp load
- UL: UL 1950 (per DNB report)
- CG: USCG CFR 183.410 (Ignition protected)
- EN: EN 60335-1
- CE: Carries the CE mark
- ABS: PT Series meets SVR 2009 4-8-3/5.9, Under 90 meters Rules 2006 4-6-4/7.19, and HSNC 2007 4-8-3/5.13.
- Charger Input - Voltage: 115/230v
- Charger Output - Amps: 13a
- Charger Output Voltage: 24v
- Charging Banks: 3
- Portable: No
- Inverter Input Voltage: 115/230v
- Inverter Output Voltage: 24v
- Outlet Qty: Hardwire
- Box Dimensions: 10"H x 10"W x 16"L WT: 9 lbs
Newmar PowerNewmar PT-24-13W Battery Charger [PT-24-13W]
Code: ORA-102328Brand: Newmar PowerLow Stock — Only 6 LeftRegular price $1,073.00Sale price $1,073.00 Regular price $0.00Unit price per- 24-volt model
- “Smart” circuitry provides three-stage charging – bulk, absorption, float
- Gel-Cell/Flooded Lead-acid/AGM battery type switch selects optimum charge/float voltages
- Multiple isolated output banks; ammeter indicates total output current
-
Newmar Power
Newmar PT-14W Battery Charger [PT-14W]
Free Shipping on $199+Regular price $943.00Sale price $943.00 Regular price $0.00Unit price perLow Stock — Only 5 Left
More info
- “Smart” circuitry provides three-stage charging – bulk, absorption, float
- Gel-Cell/Flooded Lead-acid/AGM battery type switch selects optimum charge/float voltages
- Multiple isolated output banks; ammeter indicates total output current. (Except PT-7)
- The optional sensor adjusts output voltage based on battery temperature. (Except PT-7)
- Current limiting prevents damage from overloading
- Clean well-regulated output can be used as a power supply; can power loads directly without a battery in line
- Built to last – rugged stainless-steel case with a durable white powder coat finish with an optional drip shield and marinized internal circuitry
- Protection: Current Limiting, Thermal Protection, Forced Air Cooling, Drip Shield
- ABS-type approval for battery charging and power supplies
- Input VAC (50-60 Hz.): 85-264
- Input Amps @ Full Load: @ 115 VAC: 2.8, @ 230 VAC: 1.4
- P.F. Rating: .93@230V and .98@115V
- Max Output Amps: 14
- Output Banks: 3
- Battery Capacity (Amp-Hours): 28-140
- Operating Temp. Rating Reference: T-2
- Case Size Reference: A-2
- Case Size (H x W x D): 11.2A x 7.7 x 4.75A inches (31.8A x 19.6 x 12.1A centimeters) *Note with Dripshield installed A add 1.1” (2.8 cm) to height and .92” (2.3 cm) to depth
- Weight Lbs./Kg: 8/4
- Optional Temp. Sensor Model: TCS-12/24
- Remote Panel Model: RP
- Equalize Option: Yes
- Output Indicator Reference: M-3
- Compliance Reference: CG, CE
- Temperature: -10 degrees C to +60 degrees C
- Derate Linearly From 100% @ 40 degrees C to 60% @ 60 degrees C
- Gel-Cell: 14.0 VDC Charge @ 50% load and 13.6 VDC Float @ .5 amp load
- Flooded/AGM: 14.2 VDC Charge @ 50% load and 13.4 VDC Float @ .5 amp load
- CG: USCG CFR 183.410 (Ignition protected)
- CE: Carries the CE mark
- ABS: PT Series meets SVR 2009 4-8-3/5.9, Under 90 meters Rules 2006 4-6-4/7.19, and HSNC 2007 4-8-3/5.13.
- Charger Input - Voltage: 115/230v
- Charger Output - Amps: 14a
- Charger Output Voltage: 12v
- Charging Banks: 3
- Portable: No
- Inverter Input Voltage: 115/230v
- Inverter Output Voltage: 115/230v
- Outlet Qty: Hardwire
- Box Dimensions: 10"H x 11"W x 16"L WT: 9.5 lbs
Newmar PowerNewmar PT-14W Battery Charger [PT-14W]
Code: ORA-102327Brand: Newmar PowerLow Stock — Only 5 LeftRegular price $943.00Sale price $943.00 Regular price $0.00Unit price per- “Smart” circuitry provides three-stage charging – bulk, absorption, float
- Gel-Cell/Flooded Lead-acid/AGM battery type switch selects optimum charge/float voltages
- Multiple isolated output banks; ammeter indicates total output current. (Except PT-7)
- The optional sensor adjusts output voltage based on battery temperature. (Except PT-7)
-
Newmar Power
Newmar PT-7 Battery Charger [PT-7]
Free Shipping on $199+Regular price $472.00Sale price $472.00 Regular price $0.00Unit price perLow Stock — Only 4 Left
More info
- “Smart” circuitry provides three-stage charging – bulk, absorption, float
- Gel-Cell/Flooded Lead-acid/AGM battery type switch selects optimum charge/float voltages
- Multiple isolated output banks; ammeter indicates total output current. (Except PT-7)
- The optional sensor adjusts output voltage based on battery temperature. (Except PT-7)
- Current limiting prevents damage from overloading
- Clean well-regulated output can be used as a power supply; can power loads directly without a battery in line
- Built to last – rugged stainless-steel case with a durable white powder coat finish with an optional drip shield and marinized internal circuitry
- Protection: Current Limiting, Thermal Protection, Forced Air Cooling, Drip Shield
- ABS-type approval for battery charging and power supplies
- Input VAC (50-60 Hz.): 88-132 or 176-264
- Input Amps @ Full Load: @ 115 VAC 2, @ 230 VAC 1
- P.F. Rating: >.65
- Max Output Amps: 7
- Output Banks: 2
- Battery Capacity (Amp-Hours): 14-70
- Operating Temp. Rating Reference: T-1
- Case Size Reference: A-1
- Case Size (H x W x D): 10.5 x 5.0 x 2.8 inches (26.7 x 12.7 x 7.1 centimeters)
- Weight Lbs./Kg: 3.2/1.5
- Optional Temp. Sensor Model: N/A
- Remote Panel Model: N/A
- Equalize Option: No
- Output Indicator Reference: M-1
- Compliance Reference: CG, CE
- Temperature: -10 degrees C to +45 degrees C
- Derate Linearly From 100% @ 0 degrees C to 80% @ -10 degrees C
- Gel-Cell: 14.0 VDC Charge @ 50% load and 13.6 VDC Float @ .5 amp load
- Flooded/AGM: 14.2 VDC Charge @ 50% load and 13.4 VDC Float @ .5 amp load
- CG: USCG CFR 183.410 (Ignition protected)
- CE: Carries the CE mark
- ABS: PT Series meet SVR 2009 4-8-3/5.9, Under 90 meters Rules 2006 4-6-4/7.19, and HSNC 2007 4-8-3/5.13
- Charger Input - Voltage: 115/230v
- Charger Output - Amps: 7a
- Charger Output Voltage: 12v
- Charging Banks: 2
- Portable: No
- Inverter Input Voltage: 115/230v
- Inverter Output Voltage: 12v
- Outlet Qty: Hardwire
- Box Dimensions: 6"H x 7"W x 12"L WT: 3.85 lbs
Newmar PowerNewmar PT-7 Battery Charger [PT-7]
Code: ORA-102326Brand: Newmar PowerLow Stock — Only 4 LeftRegular price $472.00Sale price $472.00 Regular price $0.00Unit price per- “Smart” circuitry provides three-stage charging – bulk, absorption, float
- Gel-Cell/Flooded Lead-acid/AGM battery type switch selects optimum charge/float voltages
- Multiple isolated output banks; ammeter indicates total output current. (Except PT-7)
- The optional sensor adjusts output voltage based on battery temperature. (Except PT-7)
-
Newmar Power
Newmar BI-100 Battery Integrator [BI-100]
Free Shipping on $199+Regular price $285.00Sale price $285.00 Regular price $0.00Unit price perLow Stock — Only 2 Left
More info
- Heavy-duty silver-plated contactor, continuous duty rated to 100 Amps or 200 Amps depending on model
- Voltage sense circuits, epoxy-encapsulated, and heavy-duty continuous-rated solenoids are all designed for use in marine environments
- 12 volt, 100 amp model has an ignition protection rating
- Has ignition protection rating
- Easy three-wire hookup for two bank systems (BATT +, BATT +, GROUND)
- Terminal for optional wiring of a remote light indicating when battery banks are integrated
- Optional internal connections can be wired through the key starter or manual override switch, tying battery banks together for an extra boost during engine start
- Terminals: Battery Connections: 5/16 in. copper alloy stud
- Approvals: CE Marked
- Dimensions (H x W x D): 100 Amp Models: 3 x 3.25 x 2.5 inches
- Weight: 1 lb.
- Operating Temperature: Control: -40 to +85 degrees C and Solenoid: -28 to +48 degrees C
- Voltage: 12 VDC
- Battery Integration Point: 13.2 VDC
- Battery Disconnect Point: 12.8 VDC
- Max. Continuous Current: 100 Amps
- Peak Maximum Current: 400 Amps
Newmar PowerNewmar BI-100 Battery Integrator [BI-100]
Code: ORA-102311Brand: Newmar PowerLow Stock — Only 2 LeftRegular price $285.00Sale price $285.00 Regular price $0.00Unit price per- Heavy-duty silver-plated contactor, continuous duty rated to 100 Amps or 200 Amps depending on model
- Voltage sense circuits, epoxy-encapsulated, and heavy-duty continuous-rated solenoids are all designed for use in marine environments
- 12 volt, 100 amp model has an ignition protection rating
- Has ignition protection rating
-
Newmar Power
Newmar 12-12-6i Power Stabilizer [12-12-6I]
Free Shipping on $199+Regular price $485.00Sale price $485.00 Regular price $0.00Unit price perLow Stock — Only 1 Left
More info
- Operate electronics at optimal input voltage, even from nearly drained batteries
- Boost voltage to compensate for voltage drops in long wire runs from batteries
- Eliminate voltage drops during momentary high current drain from batteries, as during engine start
- Eliminate voltage fluctuation from charge sources
- Eliminate voltage overshoot due to sudden removal of high current load
- Input Voltage: 10-16
- Input Amps: 8
- Output Voltage: 13.6
- Output Amps (Intermittent): 6
- Output Amps (Continuous): 6
- Case Size (H x W x D): 6.5 x 4.0 x 1.75 inches (6.8 x 10.2 x 4.5 centimeters)
- Weight: 2 lb. (.9 kg)
- Output: 12 or 24V, nominal, see matrix
- Ripple: 150 mV P-P maximum
- Regulation: 1% Line/Load
- Intermittent: 20 minutes max on time, 20% duty. The current limit is set at approx. 105% of intermittent rating.
- Continuous: 24 hours, 100% duty
- Idle Current: Less than 100 mA (including power “ON” light )
- Operating Temp: 0-50 degrees C, Derate Linearly From 100% @ 40 degrees C To 50% @ 50 degrees C. Thermal shutdown @ 70 degrees C Case Temperature.
- Switching Frequency: 40 kHz.
- Efficiency: 85% – Typical.
- Isolation – Output/Chassis; Input/chassis: 250 VDC
- Anodized aluminum heat sink case
- Front panel terminal block
- Heavy-duty mounting flange
- Conformal-coated PC board
- Operation as a battery charger (contact factory)
- Parallel/redundant operation (contact factory)
- High-vibration mounting kit
- Non-standard output voltage (contact factory)
Newmar PowerNewmar 12-12-6i Power Stabilizer [12-12-6I]
Code: ORA-102295Brand: Newmar PowerLow Stock — Only 1 LeftRegular price $485.00Sale price $485.00 Regular price $0.00Unit price per- Operate electronics at optimal input voltage, even from nearly drained batteries
- Boost voltage to compensate for voltage drops in long wire runs from batteries
- Eliminate voltage drops during momentary high current drain from batteries, as during engine start
- Eliminate voltage fluctuation from charge sources
-
Newmar Power
Newmar 12-12-3i Power Stabilizer [12-12-3I]
Free Shipping on $199+Regular price $312.00Sale price $312.00 Regular priceUnit price perLow Stock — Only 8 Left
More info
- Operate electronics at optimal input voltage, even from nearly drained batteries
- Boost voltage to compensate for voltage drops in long wire runs from batteries
- Eliminate voltage drops during momentary high current drain from batteries, as during engine start
- Eliminate voltage fluctuation from charge sources
- Eliminate voltage overshoot due to sudden removal of high current load
- Input Voltage: 10-16
- Input Amps: 4
- Output Voltage: 13.6
- Output Amps (Intermittent): 3
- Output Amps (Continuous): 3
- Case Size (H x W x D): 3.5 x 3.5 x 1.75 inches (8.9 x 8.9 x 4.5 centimeters)
- Weight: 1 lb. (.45 kg)
- Output: 12 or 24V, nominal, see matrix
- Ripple: 150 mV P-P maximum
- Regulation: 1% Line/Load
- Intermittent: 20 minutes max on time, 20% duty. Current limit is set at approx. 105% of intermittent rating.
- Continuous: 24 hours, 100% duty
- Idle Current: Less than 100 mA (including power “ON” light )
- Operating Temp: 0-50 degrees C, Derate Linearly From 100% @ 40 degrees C To 50% @ 50 degrees C. Thermal shutdown @ 70 degrees C Case Temperature.
- Switching Frequency: 40 kHz.
- Efficiency: 85% – Typical.
- Isolation – Output/Chassis; Input/chassis: 250 VDC
- Anodized aluminum heat sink case
- Front panel terminal block
- Heavy-duty mounting flange
- Conformal-coated PC board
- Operation as a battery charger (contact factory)
- Parallel/redundant operation (contact factory)
- High-vibration mounting kit
- Non-standard output voltage (contact factory)
Newmar PowerNewmar 12-12-3i Power Stabilizer [12-12-3I]
Code: ORA-102294Brand: Newmar PowerLow Stock — Only 8 LeftRegular price $312.00Sale price $312.00 Regular priceUnit price per- Operate electronics at optimal input voltage, even from nearly drained batteries
- Boost voltage to compensate for voltage drops in long wire runs from batteries
- Eliminate voltage drops during momentary high current drain from batteries, as during engine start
- Eliminate voltage fluctuation from charge sources
-
Free Shipping on $199+Regular price $605.00Sale price $605.00 Regular price $0.00Unit price perLow Stock — Only 4 Left
More info
- Designed to fit, designed to fit Starlink High-Performance.
- Pre-drilled mounting holes allow Starlink to fasten straight to the PowerTower
- No need to cut the cable connectors off for installation
- Marine sealant is not required
- Paint finishes comply with our unique 4-step marine paint system
- A range of accessories light bars can be bolted to the back of the PowerTower
ScanstrutScanstrut 6" Aluminum PowerTower Mount f/Starlink [APT-150-SL-01]
Code: ORA-102235Brand: ScanstrutLow Stock — Only 4 LeftRegular price $605.00Sale price $605.00 Regular price $0.00Unit price per- Designed to fit, designed to fit Starlink High-Performance.
- Pre-drilled mounting holes allow Starlink to fasten straight to the PowerTower
- No need to cut the cable connectors off for installation
- Marine sealant is not required
-
Victron Energy
Victron Lynx Smart BMS 1000 Battery Management System f/Lithium Smart Batteries [LYN034170210]
Save $207.90
Free Shipping on $199+Regular price $1,178.10Sale price $1,178.10 Regular price $1,386.00Unit price perSale: $207.90 offIn Stock
More info
- Lynx Distributor with 2 fused paralleled lithium-ion smart batteries.
- Lynx Smart BMS with BMS, contactor, and battery monitor
- A second Lynx distributor provides fused connections for inverter/charger(s), loads and chargers (additional modules can be added if more connections are needed)
- A Cerbo GX (or other GX device) to read out the Lynx Smart BMS and Lynx Distributor data.
- Battery Voltage Range: 9 – 60 VDC
- Maximum Input Voltage: 75 VDC
- Supported System Voltages: 12, 24, or 48 V
- Reverse Polarity Protection: No
- Main Safety Contactor Continuous Current Rating: 1000 A continuous
- Main Safety Contactor Peak Current Rating: 1200 A for 5 minutes
- Power Consumption OFF Mode: 0.3 mA for all system voltages
- Power Consumption in Standby Mode: Approximately 0.6 W (50 mA at 12 V)
- Power Consumption in ON Mode: Approx. 2.6 W (217 mA at 12 V) depending on the state of the relays
- Approximately 4.2 W (350 mA at 12 V) depending on the state of the relays
- Minimum Load Resistance for Pre-Charging: 10 Ω and above for 12 V systems, 20 Ω and above for 24 V and 48 V systems
- AUX Output Maximum Current Rating: 1.1 A continuous, protected by resettable fuse
- Allow-to-Charge Port Maximum Current Rating: 0.5 A at 60 VDC, protected by a resettable fuse
- Allow-to-Discharge Port Maximum Current Rating: 0.5 A at 60VDC, protected by a resettable fuse
- Alarm Relay (SPDT) Maximum current Rating: 2 A at 60 VDC
- Busbar: M10 (Torque: 17 Nm)
- VE.Can: RJ45
- I/O: Removable multi-connector with screw terminals
- Enclosure Material: ABS
- Enclosure Dimensions (h x w x d): 230 x 180 x 100 mm
- Unit Weight: 2.7 kg
- Busbar Material: Tinned copper
- Busbar Dimensions (h x w): 8 x 30 mm
- Operating Temperature Range: -40 °C to +60 °C
- Storage Temperature Range: -40 °C to +60 °C
- Humidity Max.: 95 % (non-condensing)
- Protection Class: IP22
- Safety: EN-IEC 63000:2018
- EMC: EN-IEC 61000-6-3:2007/A1:2011/AC:2012
- QMS: NEN-EN-ISO 9001:2015
Victron EnergyVictron Lynx Smart BMS 1000 Battery Management System f/Lithium Smart Batteries [LYN034170210]
Code: ORA-101855Brand: Victron EnergyIn StockRegular price $1,178.10Sale price $1,178.10 Regular price $1,386.00Unit price perSale: $207.90 off- Lynx Distributor with 2 fused paralleled lithium-ion smart batteries.
- Lynx Smart BMS with BMS, contactor, and battery monitor
- A Cerbo GX (or other GX device) to read out the Lynx Smart BMS and Lynx...
- Battery Voltage Range: 9 – 60 VDC
-
Bennett Marine
Bennett Marine 22 Wire Harness [WH100022]
Free Shipping on $199+Regular price $46.00Sale price $46.00 Regular priceUnit price perLow Stock — Only 10 Left
More info
22' Wire HarnessThis wire harness is 22 feet long and is meant to be plugged into a Bennett Hydraulic Power Unit. The color-coded wires on the other end make for an easy connection at the helm.WARNING: This product can expose you to chemicals which are known to the State of...Bennett MarineBennett Marine 22 Wire Harness [WH100022]
Code: ORA-101667Brand: Bennett MarineLow Stock — Only 10 LeftRegular price $46.00Sale price $46.00 Regular priceUnit price per22' Wire HarnessThis wire harness is 22 feet long and is meant to be plugged into a Bennett Hydraulic Power...
-
ARCO Marine
ARCO Marine Original Equipment Quality Replacement Yamaha Outboard Starter - 2003-2009 [3456]
Free Shipping on $199+Regular price $498.84Sale price $498.84 Regular price $0.00Unit price perLow Stock — Only 2 Left
More info
- Dynamically tested and packaged for out-of-the-box performance
- Nickel-coated and/or epoxy-painted to reduce corrosion
- Sealed to minimize water intrusion
- Designed for long life and optimum performance
- Armatures are tested to withstand 50 times operating voltages (12 volts)
- YAMAHA Outboard Starter 60X-81800-01-00
- YAMAHA Outboard Starter 60X-81800-00-00
- YAMAHA Outboard Starter 60V-81800-00-00
- SIERRA Outboard Starter 18-6832
- HITACHI Outboard Starter S114-863
ARCO MarineARCO Marine Original Equipment Quality Replacement Yamaha Outboard Starter - 2003-2009 [3456]
Code: ORA-101656Brand: ARCO MarineLow Stock — Only 2 LeftRegular price $498.84Sale price $498.84 Regular price $0.00Unit price per- Dynamically tested and packaged for out-of-the-box performance
- Nickel-coated and/or epoxy-painted to reduce corrosion
- Sealed to minimize water intrusion
- Designed for long life and optimum performance
-
Free Shipping on $199+Regular price $350.24Sale price $350.24 Regular priceUnit price perLow Stock — Only 1 Left
More info
- Dynamically tested and packaged for out-of-the-box performance
- Nickel-coated and/or epoxy-painted to reduce corrosion
- Sealed to minimize water intrusion
- Designed for long life and optimum performance
- Armatures are tested to withstand 50 times operating voltages (12 volts)
- SUZUKI Outboard Starter 31100-96J02
- SUZUKI Outboard Starter 31100-96J01
- SUZUKI Outboard Starter 31100-96J00
- SUZUKI Outboard Starter 31100-93J00
- JOHNSON EVINRUDE Outboard Starter 5035078
- SIERRA Outboard Starter 18-6941
- HITACHI Outboard Starter S114-868
ARCO MarineARCO Marine Original Equipment Quality Replacement Honda Tohatsu
Code: ORA-101655Brand: ARCO MarineLow Stock — Only 1 LeftRegular price $350.24Sale price $350.24 Regular priceUnit price per- Dynamically tested and packaged for out-of-the-box performance
- Nickel-coated and/or epoxy-painted to reduce corrosion
- Sealed to minimize water intrusion
- Designed for long life and optimum performance
-
Free Shipping on $199+Regular price $354.73Sale price $354.73 Regular priceUnit price perLow Stock — Only 7 Left
More info
- Dynamically tested and packaged for out-of-the-box performance
- Nickel-coated and/or epoxy-painted to reduce corrosion
- Sealed to minimize water intrusion
- Designed for long life and optimum performance
- Armatures are tested to withstand 50 times operating voltages (12 volts)
- SUZUKI Outboard Starter 31100-96J02
- SUZUKI Outboard Starter 31100-96J01
- SUZUKI Outboard Starter 31100-96J00
- SUZUKI Outboard Starter 31100-93J00
- JOHNSON EVINRUDE Outboard Starter 5035078
- SIERRA Outboard Starter 18-6941
- HITACHI Outboard Starter S114-868
ARCO MarineARCO Marine Original Equipment Quality Replacement Suzuki OMC - ORA-101654
Code: ORA-101654Brand: ARCO MarineLow Stock — Only 7 LeftRegular price $354.73Sale price $354.73 Regular priceUnit price per- Dynamically tested and packaged for out-of-the-box performance
- Nickel-coated and/or epoxy-painted to reduce corrosion
- Sealed to minimize water intrusion
- Designed for long life and optimum performance
-
Free Shipping on $199+Regular price $1,076.85Sale price $1,076.85 Regular priceUnit price perLow Stock — Only 2 Left
More info
- Dynamically tested and packaged for out-of-the-box performance
- Nickel-coated and/or epoxy-painted to reduce corrosion
- Sealed to minimize water intrusion
- Designed for long life and optimum performance
- Armatures are tested to withstand 50 times operating voltages (12 volts)
- YAMAHA Outboard Starter 6AW-81800-00-00
- MITSUBISHI Outboard Starter M008T71771
- MITSUBISHI Outboard Starter M008T71772
- SIERRA Outboard Starter 18-55507
ARCO MarineARCO Marine Original Equipment Quality Replacement Yamaha Outboard - ORA-101653
Code: ORA-101653Brand: ARCO MarineLow Stock — Only 2 LeftRegular price $1,076.85Sale price $1,076.85 Regular priceUnit price per- Dynamically tested and packaged for out-of-the-box performance
- Nickel-coated and/or epoxy-painted to reduce corrosion
- Sealed to minimize water intrusion
- Designed for long life and optimum performance
-
Free Shipping on $199+Regular price $560.86Sale price $560.86 Regular priceUnit price perLow Stock — Only 2 Left
More info
- Dynamically tested and packaged for out-of-the-box performance
- Nickel-coated and/or epoxy-painted to reduce corrosion
- Sealed to minimize water intrusion
- Designed for long life and optimum performance
- Armatures are tested to withstand 50 times operating voltages (12 volts)
- YAMAHA Outboard Starter 6BG-81800-00-00
- MITSUBISHI Outboard Starter M0TA5071
- SIERRA Outboard Starter 18-6964
ARCO MarineARCO Marine Original Equipment Quality Replacement Yamaha Outboard - ORA-101652
Code: ORA-101652Brand: ARCO MarineLow Stock — Only 2 LeftRegular price $560.86Sale price $560.86 Regular priceUnit price per- Dynamically tested and packaged for out-of-the-box performance
- Nickel-coated and/or epoxy-painted to reduce corrosion
- Sealed to minimize water intrusion
- Designed for long life and optimum performance
-
ARCO Marine
ARCO Marine Original Equipment Quality Replacement Suzuki OMC Outboard Starter - 2005-2018 Models [3449]
Free Shipping on $199+Regular price $360.22Sale price $360.22 Regular price $0.00Unit price perLow Stock — Only 2 Left
More info
- Dynamically tested and packaged for out-of-the-box performance
- Nickel-coated and/or epoxy-painted to reduce corrosion
- Sealed to minimize water intrusion
- Designed for long life and optimum performance
- Armatures are tested to withstand 50 times operating voltages (12 volts)
- SUZUKI Outboard Starter 31100-94J22
- SUZUKI Outboard Starter 31100-94J21
- SUZUKI Outboard Starter 31100-94J20
- SUZUKI Outboard Starter 31100-94J10
- JOHNSON EVINRUDE Outboard Starter 5036244
ARCO MarineARCO Marine Original Equipment Quality Replacement Suzuki OMC Outboard Starter - 2005-2018 Models [3449]
Code: ORA-101651Brand: ARCO MarineLow Stock — Only 2 LeftRegular price $360.22Sale price $360.22 Regular price $0.00Unit price per- Dynamically tested and packaged for out-of-the-box performance
- Nickel-coated and/or epoxy-painted to reduce corrosion
- Sealed to minimize water intrusion
- Designed for long life and optimum performance
-
Free Shipping on $199+Regular price $481.71Sale price $481.71 Regular priceUnit price perLow Stock — Only 4 Left
More info
- Dynamically tested and packaged for out-of-the-box performance
- Nickel-coated and/or epoxy-painted to reduce corrosion
- Sealed to minimize water intrusion
- Designed for long life and optimum performance
- Armatures are tested to withstand 50 times operating voltages (12 volts)
- SUZUKI Outboard Starter 31100-98L10
- SUZUKI Outboard Starter 31100-98L00
- SIERRA Outboard Starter 18-6962
- MITSUBISHI Outboard Starter M000TD5872
ARCO MarineARCO Marine Original Equipment Quality Replacement Suzuki Outboard
Code: ORA-101650Brand: ARCO MarineLow Stock — Only 4 LeftRegular price $481.71Sale price $481.71 Regular priceUnit price per- Dynamically tested and packaged for out-of-the-box performance
- Nickel-coated and/or epoxy-painted to reduce corrosion
- Sealed to minimize water intrusion
- Designed for long life and optimum performance
-
Free Shipping on $199+Regular price $345.74Sale price $345.74 Regular priceUnit price perLow Stock — Only 5 Left
More info
- Tilt trim motors are dynamically tested to ensure out-of-the-box performance
- Motor shafts induction case hardened at bearing surfaces for superior wear resistance
- Epoxy Powder coated for maximum insulation protection
- YAMAHA Tilt Trim Motor 61A-43880-02-00
- YAMAHA Tilt Trim Motor 61A-43880-01-00
- YAMAHA Tilt Trim Motor 61A-43880-00-00
- SIERRA Tilt Trim Motor 18-6782
ARCO MarineARCO Marine Original Equipment Quality Replacement Yamaha Tilt Trim - ORA-101649
Code: ORA-101649Brand: ARCO MarineLow Stock — Only 5 LeftRegular price $345.74Sale price $345.74 Regular priceUnit price per- Tilt trim motors are dynamically tested to ensure out-of-the-box performance
- Motor shafts induction case hardened at bearing surfaces for superior wear resistance
- Epoxy Powder coated for maximum insulation protection
- YAMAHA Tilt Trim Motor 61A-43880-02-00
-
Free Shipping on $199+Regular price $352.51Sale price $352.51 Regular priceUnit price perLow Stock — Only 3 Left
More info
- Tilt trim motors are dynamically tested to ensure out-of-the-box performance
- Motor shafts induction case hardened at bearing surfaces for superior wear resistance
- Epoxy Powder coated for maximum insulation protection
- YAMAHA Tilt Trim Motor 67C-43880-10-00
- YAMAHA Tilt Trim Motor 67C-43880-01-00
- YAMAHA Tilt Trim Motor 67C-43880-00-00
- YAMAHA Tilt Trim Motor 65W-43880-10-00
ARCO MarineARCO Marine Original Equipment Quality Replacement Yamaha Tilt Trim - ORA-101648
Code: ORA-101648Brand: ARCO MarineLow Stock — Only 3 LeftRegular price $352.51Sale price $352.51 Regular priceUnit price per- Tilt trim motors are dynamically tested to ensure out-of-the-box performance
- Motor shafts induction case hardened at bearing surfaces for superior wear resistance
- Epoxy Powder coated for maximum insulation protection
- YAMAHA Tilt Trim Motor 67C-43880-10-00
-
Save $69.30
Free Shipping on $199+Regular price $392.70Sale price $392.70 Regular price $462.00Unit price perSale: $69.30 offLow Stock — Only 3 Left
More info
- Single “Joystick” control
- NMEA 2000 compatible
- LED display of each trim tab position
- Microprocessor-based trim tab control with LED tab position indicators
- NMEA 2000 compatible with JLC-NMEA adapter
- Move both tabs up or down simultaneously with a single motion
- Dual station ready – just add a second JLC-11 and JR-* cable (sold separately)
- Automatic return to last tab position if the ignition key is turned off and back on again
- Completely sealed, completely waterproof, and will not deteriorate in sunlight
- Automatic tab retraction and calibration with key or accessory switch off
- Easy upgrade from any of our Lectrotab controls
- No external power module required
- LED tab position indicators dim automatically in darkness and brighten in sunlight
- Single or Dual Actuator per tab
- Operates on 12 or 24 VDC systems
- Display Color: Black
- Number of Stations/Actuators: Single or Dual Station/1 or 2 Actuator/tab
- Overall Width: 3.0"/77mm
- Overall Height/Thickness: 3.0" (77mm)/2.0" (50mm)
- Mounting Hole Cutout (Diameter): 2.625"/66.7mm
- DC Voltage: 12/24
- Fuse Size Power Input (1 Actuator Per Tab): 12 VDC-15 or 20 AMPs 24 VDC = 10 AMPs
- Fuse Size Aux. (Must Connect): 1 to 2 AMPs
LectrotabLectrotab Joystick LED Trim Tab Control [JLC-11]
Code: ORA-101159Brand: LectrotabLow Stock — Only 3 LeftRegular price $392.70Sale price $392.70 Regular price $462.00Unit price perSale: $69.30 off- Single “Joystick” control
- NMEA 2000 compatible
- LED display of each trim tab position
- Microprocessor-based trim tab control with LED tab position indicators
