Description
Bump the Boat
The KICKER® KMF 12-inch Marine Subwoofer makes serious bass — no enclosure necessary! Made to take the power and the weather, this sub is custom made to bang in your boat. Packed with features and made for marine, KICKER gives you the deep, loud bass your boat needs with the KMF series of subs.
Features
- Four-Ohm Voice Coil
- Injection-Molded Polypropylene Cone
- Co-molded Santoprene® Surround
- UniPlate™ Back Plate And Pole Piece
- Thick Tinsel Leads
- Large Ceramic Magnet
- Polymer Basket Resists Corrosion
- Protective Terminal Cap
- Stainless Mounting Hardware Included
- Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure (ASTM B117 200 hr. Salt Fog Test) (ASTM G154 400 hr. Accelerated UV Test)
Want setup help? Go to KICKERU for a free woofer and amplifier configuration app!
*The KMF 12-inch Subwoofer works best with 175 watts of recommended power. See below for more details.
Exceeds Industry Standards
We don’t just say it’s “marine ready” — we prove it! ASTM-tested for UV and salt/fog exposure, all KICKER Marine Subwoofers are designed specifically for boat audio and meet or exceed the strictest standards in the industry.
Built to Last
An injection-molded polypropylene cone, co-molded Santoprene® surround, UniPlate™ back plate and pole piece, and a corrosion-resistant polymer basket help the KMF12 thrive in marine environments. A protective terminal cap and 316L stainless mounting hardware round out a build made to endure almost any weather conditions.
Specifications
- Woofer (in / mm): 12" (30 mm)
- Impedance (Ω): 4 SVC
- Peak Power (watts, per ANSI/CTA-2031-A): 350
- Recommended Amplifier Power (watts RMS): 175
- Sealed Enclosure Volume Min-Max (ft³, L): N/A
- Vented Enclosure Volume Min-Max (ft³, L): N/A
- Frequency Response (Hz): 30–500
- Mounting Depth (in / cm): 5.5" (13.9 cm)
- Hole Diameter (in / cm): 11" (27.9 cm)
- Outer Diameter (in / cm): 13" (32.95 cm)
- Warranty: 3 Years from Kicker (Click Here For Kicker Warranty Contact and Details)
What's in the Box
- 1 – 12" Woofer
- 1 – Back Gasket
- 8 – Mounting Screws
- 8 – Mounting Screw Clips
- 1 – Manual
Due to continual development, product and specifications are subject to change without notice. Stillwater Designs and its agents are not responsible for typographical errors. Port volume excluded.