Every tower speaker we've reviewed so far, the 46KMFC65 and 46KMFC8, bolts to a flat surface. The Kicker KMTC65 doesn't need one: it's a 6.5-inch LED coaxial tower speaker that clamps directly around round tubing from 1.5 to 3.25 inches in diameter, rotates in nearly any direction without tools, and is rated 65W RMS (195W peak) at 4-ohm, at $699.99 (down from $799.99).
If your boat's tower or rail is round tubing with no flat mounting plate anywhere on it, the flat-mount KMFC65 simply has nothing to bolt to. As an authorized Kicker dealer, this is the model we point people toward in exactly that situation, and it's worth understanding what the clamp mount trades off against the flat-mount design.
Key Takeaways
- Clamps around round tubing (1.5-3.25 inches) with a toolless locking cam/toggle system — no flat mounting surface required, unlike the 46KMFC65.
- Rotates in nearly any direction after mounting, letting you aim the speaker without repositioning the clamp itself.
- 65W RMS / 195W peak at 4-ohm — identical power rating to the flat-mount 46KMFC65.
- Wiring routes through the clamp itself ("through-clamp wiring"), rather than through the mounting surface the way the KMFC line's through-mount system works.
- At $699.99, it costs $200 more than the 46KMFC65 for the same power rating — the premium buys the mounting mechanism, not more output.
Clamp Mount vs. Flat Mount
The 46KMFC65 uses adjustable inserts that bolt to a flat surface and tilt 0°, 5°, or 10°. The KMTC65 skips the flat surface requirement entirely, clamping around a round tube with a stainless steel/ABS clamp and locking into position with a toolless cam/toggle mechanism. Once mounted, the speaker rotates in nearly any direction, which is a genuinely different kind of aiming flexibility than the KMFC65's fixed tilt-angle inserts — you're not limited to three preset angles, you can rotate the whole housing.
If your tower or rail already has a flat mounting plate, the KMFC65 is $200 cheaper for the same power output. If it doesn't, and you're working with bare round tubing, the KMTC65 is the option that actually installs without additional hardware.
Check current price and availability →
Feature Walkthrough
Clamp Range and Rotation
The stainless steel/ABS clamp fits tubing from 1.5 to 3.25 inches in diameter — measure your tower or rail's actual tube diameter before ordering, since anything outside that range won't clamp securely. Once mounted, the near-full rotation swivel lets you redirect sound without loosening or repositioning the clamp itself.
Power and Sound
65W RMS, 195W peak, at 4-ohm, with a 35Hz-21kHz frequency response — the same numbers as the 46KMFC65, using the same driver class (4-ohm coaxial, 3/4-inch PEI tweeter).
LED Lighting
Seven-color LED grille lighting is included standard, matching the KMFC line's approach.
Through-Clamp Wiring
Wiring routes through the clamp mechanism itself, which keeps cable runs tidy on round tubing where there's no flat surface to route wire behind.
Amplifier Pairing
At 65W RMS, the same pairing logic as the 46KMFC65 applies: the KMA360.4 (90W RMS/channel at 4-ohm) is the closer match of the amps we've reviewed, while the KMA600.4's 150W RMS/channel leaves real headroom unused. This is our own power-matching read, not an official Kicker-stated pairing.
Who It's For
Choose the KMTC65 specifically if your mounting point is round tubing with no flat surface — a wakeboard tower frame, a rail, a roll bar. If you have a flat mounting plate available, compare against the cheaper 46KMFC65 first, since the power rating is identical.
Honest Cons
$200 more than the flat-mount 46KMFC65 for the same power output — you're paying for the clamp mechanism specifically, not better sound.
Limited to 1.5-3.25" tubing diameter. Measure your actual tube before ordering; this isn't a universal clamp for any size tower.
No formal IP rating published, consistent with most of the marine speakers in this catalog — general ASTM UV/salt-fog compliance is stated instead.
Frequently Asked Questions
What tube sizes does the clamp fit?
1.5 to 3.25 inches in diameter. Measure your tower or rail tubing before ordering to confirm it falls in that range.
Can I rotate the speaker after it's mounted?
Yes — the toolless locking cam/toggle system allows near-full rotation without needing to loosen the clamp itself.
Is this the same speaker as the 46KMFC65, just with a different mount?
The power rating and driver class are the same (65W RMS, 4-ohm, 3/4-inch tweeter), but the KMTC65 is a distinct SKU with its own enclosure design built around the clamp mount, not simply the KMFC65 with a different bracket attached.
Does this need a flat surface at all?
No — that's the entire point of the clamp mount. It's designed specifically for round tubing with no flat mounting plate.
Bottom Line
The KMTC65 solves a mounting problem the flat-mount KMFC65 can't: round tubing with nowhere flat to bolt anything. If that's your actual constraint, the $200 premium buys a real solution. If you have a flat surface available, the 46KMFC65 delivers the same output for less.