BEP Pro Installer Link Joinder 4-Way [779-LBJ-4]

• Tin-plated high-purity copper for maximum conductivity and corrosion resistance
• 650 AMP continuous rating between two adjacent positions
• 450 AMP continuous rating across all positions
• This link bar is intended to be used with 3/8" studs

BEP Pro Installer Link Joiner 5-Way [779-LBJ-5]

• Tin-plated high-purity copper for maximum conductivity and corrosion resistance
• 650 AMP continuous rating between two adjacent positions
• 400 AMP continuous rating across all positions
• Bars can be doubled up for additional amperage

BEP Pro Installer Link Joiner 6-Way [779-LBJ-6]

• Tin-plated high-purity copper for maximum conductivity and corrosion resistance
• 650 AMP continuous rating between two adjacent positions
• 350 AMP continuous rating across all positions
• Bars can be doubled up for additional amperage

BEP Pro Installer Single Insulated Distribution Stud - 1/4" - Positive [IS-6MM-1R/DSP]

• Made with high temperature plastic bases
• Stud covers push securely over the threaded stud covering to ABYC standards
• Dual studs ideal for +ve / -ve connections, branch circuits, windlass or inverter installations
• Covers supplied with display versions

BEP Pro Installer Single Insulated Distribution Stud - 1/4" [IS-6MM-1/DSP]

• Made with high temperature plastic bases
• Stud covers push securely over the threaded stud covering to ABYC standards
• Dual studs ideal for +ve / -ve connections, branch circuits, windlass or inverter installations
• Covers supplied with display versions

BEP Pro Installer Single Insulated Stud w/Power Tap Plate - 10mm [IST-10MM-1SPT]

• Saves space and adds design flexibility
• Insert molded cable lugs and fiber-reinforced base provide strength and durability
• Power tapping plate converts from a single stud to add up to four connection points for...
• Innovative, clear covers insulate and protect on three sides and offer easy access

BEP Pro Installer Terminal Block - 6 Way - 30A [TB-118-6P/DSP]

BEP Pro Installer Terminal Block - 6 Way - 30AThis terminal block is ideal for isolated connections up to 30A...

BEP Pro Installer Z Bus Bar - 10 Way - 200A [777-Z10W-200]

• Easily extend Z-Bars by placing on end or back-to-back
• Clean installation-all cables can be run from one side of the Z-bar
• Innovative clear covers insulate and protect on three sides and offer easy acces

BEP Pro Installer Z Bus Bar - 18 Way - 200A [777-Z18W-200]

• Easily extend Z-Bars by placing on end or back-to-back
• Clean installation-all cables can be run from one side of the Z-bar
• Innovative clear covers insulate and protect on three sides and offer easy access

BEP Push Button Switch - 24V Latching On/Off - Blue LED [80-511-0007-01]

• Maximum switch current rating 5 Amps
• IP67 environmental protection switches
• Color: Blue
• Action: ON-OFF

BEP Push-Button Switch 12V Latching On/Off - Blue LED [80-511-0003-00]

• Maximum switch current rating 5 amps
• IP67 environmental protection switches
• IP50 environmental protection buzzers
• 80 decibel buzzer sound intensity

BEP Push-Button Switch 12V Momentary On/Off - Blue LED

• Maximum switch current rating 5 amps
• IP67 environmental protection switches
• IP50 environmental protection buzzers
• 80 decibel buzzer sound intensity

BEP Push-Button Switch 12V Momentary On/Off - Red LED [80-511-0002-00]

• Maximum switch current rating 5 amps
• IP67 environmental protection switches
• IP50 environmental protection buzzers
• 80 decibel buzzer sound intensity

BEP Red SPST Momentary Contact Switch - OFF/(ON) [1001401]

• Nominal voltage is 12V/24V DC
• Rated for 5A at 12V DC, 5A at 24V DC
• Two 1/4" blade terminals
• Fits panels up to 1/4" thick

BEP Remote On/Off Key Switch f/701-MD & 720-MDO Battery Switches [80-724-0006-00]

Remote On/Off Key Switch f/701-MD & 720-MDO Battery SwitchesThe remote On/Off key switch is used for the remote operation of...

BEP Remote Operated Battery Switch - 275A Cont - Deutsch Plug [701-MD-D]

• Remote operation
• Battery switch can be mounted alongside battery, reducing cable lengths and cable sizes. (Large cost and...
• Reduced installation labor due to shorter battery cable runs
• Manual override option to meet CE/ABYC requirements

BEP Remote Operated Battery Switch w/Optical Sensor - 500A 12/24v [720-MDO]

• Remote operation
• Battery switch can be mounted alongside battery, reducing cable lengths and cable sizes. (Large cost and...
• Reduced installation labor due to shorter battery cable runs
• Manual override option to meet CE/ABYC requirements

BEP Replacement Key f/701 Battery Switches [701-KEY]

Replacement Key for 701This replacement knob replaces the existing knob for the 701 switch.WARNING: This product can expose you to...

BEP SPDT Chrome Plated Toggle Switch - (ON)/OFF/(ON) [1002004]

• Nominal voltage is 12V/24V DC
• Rated for 25A at 12V DC, 15A at 24V DC
• Three #6-32 screw terminals
• Mounting stem 15/32" fits panels up to 1/4" thick

BEP SPDT Chrome Plated Toggle Switch - ON/OFF/(ON) [1002015]

• Nominal voltage is 12V/24V DC
• Rated for 25A at 12V DC, 15A at 24V DC
• Three #6-32 screw terminals
• Mounting stem 15/32" fits panels up to 1/4" thick

BEP SPDT Chrome Plated Toggle Switch - ON/OFF/ON [1002001]

• Nominal voltage is 12V DC
• Rated for 25A at 12V DC
• Three 1/4" blade terminals
• Mounting stem 15/32" fits panels up to 1/4" thick

BEP SPDT Contura Dimmer Switch - (ON)/OFF/(ON) [1001806]

• Nominal voltage 12V/24V DC
• Rated for 20A at 12V DC, 15A at 24V DC
• 1/4" blade terminals
• Snap-in mounting to fit panel hole 1.45" x .83" into panels .093" to .187" thick

BEP SPDT Contura Switch - 1-Amber LED - (ON)/OFF/ON [1001805]

• Nominal voltage 12V/24V DC
• Rated for 20A at 12V DC, 15A at 24V DC
• 1/4" blade terminals
• Includes one Amber LED