-
Save $340.00
Free Shipping on $199+Regular price $3,359.00Sale price $3,359.00 Regular price $3,699.00Unit price perSale: $340.00 offLow Stock — Only 3 Left
More info
- 1x BPS-8 Control Module with Integrated Power Cable
- 8x Submersible Ultrasonic Transducers with 15ft of Cable
- 4x Additional 15ft Extension Cables
- 2x Epoxy Kits
- 1x Printed Installation and Operation Manual
- Voltage: 12V or 24V DC
- Average Power Draw: 2Ah
- Transducer Strength: 60W
- Cable Length: 15ft per transducer
- Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz)
- No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy.
- Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller.
- Mounting the Controller: The BPS-1 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel.
- The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance.
- Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach.
- Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations.
- Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans.
- Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed.
- Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs.
- Diver Savings: Reduces the need for monthly hull cleaning services.
- Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders.
- Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required.
BPS MarineBPS Marine BPS-8 8-Transducer Ultrasonic Antifouling System - 12VDC [BPS-8]
Code: ORA-112022Brand: BPS MarineLow Stock — Only 3 LeftRegular price $3,359.00Sale price $3,359.00 Regular price $3,699.00Unit price perSale: $340.00 off- 1x BPS-8 Control Module with Integrated Power Cable
- 8x Submersible Ultrasonic Transducers with 15ft of Cable
- 4x Additional 15ft Extension Cables
- 2x Epoxy Kits
-
Free Shipping on $199+Regular price $139.00Sale price $139.00 Regular price $0.00Unit price perIn Stock
More info
- 60ML Primer Base
- 15ML Primer Hardener
- 100ML Clear Topcoat
PropGlide USAPropGlide Prop Running Gear Coating Kit - Extra Small - 175ml [PCK-175]
Code: ORA-88667Brand: PropGlide USAIn StockRegular price $139.00Sale price $139.00 Regular price $0.00Unit price per- 60ML Primer Base
- 15ML Primer Hardener
- 100ML Clear Topcoat
-
Free Shipping on $199+Regular price $299.00Sale price $299.00 Regular price $0.00Unit price perIn Stock
More info
- 300ML Primer Base
- 75ML Primer Hardener
- 250ML Clear Topcoat
PropGlide USAPropGlide Prop Running Gear Coating Kit - Medium - 625ml [PCK-625]
Code: ORA-88669Brand: PropGlide USAIn StockRegular price $299.00Sale price $299.00 Regular price $0.00Unit price per- 300ML Primer Base
- 75ML Primer Hardener
- 250ML Clear Topcoat
-
Save $350.00
Free Shipping on $199+Regular price $3,149.00Sale price $3,149.00 Regular price $3,499.00Unit price perSale: $350.00 offLow Stock — Only 3 Left
More info
- 1x PRO-6 Control Module with Integrated Power Cable
- 6x Submersible Ultrasonic Transducers with 15ft of Cable
- 3x Additional 15ft Extension Cables
- 2x Epoxy Kits
- 1x Printed Installation and Operation Manual
- Voltage: 24V DC
- Average Power Draw: 1.5Ah
- Transducer Strength: 120W
- Cable Length: 15ft per transducer
- Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz)
- No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy.
- Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller.
- Mounting the Controller: The BPS-1 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel.
- The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance.
- Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach.
- Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations.
- Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans.
- Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed.
- Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs.
- Diver Savings: Reduces the need for monthly hull cleaning services.
- Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders.
- Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required.
BPS MarineBPS Marine PRO-6 6-Transducer Ultrasonic Antifouling System - 24VDC [24V-PRO-6]
Code: ORA-112025Brand: BPS MarineLow Stock — Only 3 LeftRegular price $3,149.00Sale price $3,149.00 Regular price $3,499.00Unit price perSale: $350.00 off- 1x PRO-6 Control Module with Integrated Power Cable
- 6x Submersible Ultrasonic Transducers with 15ft of Cable
- 3x Additional 15ft Extension Cables
- 2x Epoxy Kits
-
Free Shipping on $199+Regular price $42.99Sale price $42.99 Regular price $0.00Unit price perIn Stock
More info
- Foulfree™ is simple to apply and lasts for 12-24 months
- Transducer safe - Airmar certifies that Foulfree™ coating on its transducers results in no loss in transducer performance
- Biocide Free - Foul-release, not antifoul. Foul-release coatings use physical means to reduce fouling, creating a surface that’s tough for marine organisms to adhere to
- Easy to apply
- A foul-free transducer equals more clarity, detail, and visibility below the waterline.
- Coverage Rate - 1ft² (two (2) average size transducers)
- Abrasive pad
- XDclean wipe
- XDprime, wipe
- Applicator brush
- Foulfree Clear coat - 15ml
- Type: Service Kits
- Box Dimensions: 2"H x 2"W x 5"L WT: 0.15 lbs
- UPC: 9421903335425
PropspeedPropspeed - Foulfree Transducer Coating [FFKIT]
Code: ORA-91502Brand: PropspeedIn StockRegular price $42.99Sale price $42.99 Regular price $0.00Unit price per- Foulfree™ is simple to apply and lasts for 12-24 months
- Transducer safe - Airmar certifies that Foulfree™ coating on its transducers results in no loss in...
- Easy to apply
- A foul-free transducer equals more clarity, detail, and visibility below the waterline.
-
Free Shipping on $199+Regular price $32.47Sale price $32.47 Regular priceUnit price perLow Stock — Only 6 Left
More info
- Easy application – Brush on and it will do the rest!
- Reduce dust and noise – Easy removal
- Effectively allows multiple stubborn layers to be removed
- Marine Grade: DCM & NMP free*
- Remove all marine growth from the surface.
- Apply Silicone Remover approximately. 2mm thick using a brush. Tip: Prevent drying out by covering the treated area with cling wrap in hot/windy climates.
- Do not allow the remover to come in contact with water.
- Leave in contact for 2-3 hours or until softened.
- Remove with a stiff nylon or wire brush, scrubbing in a circular motion.
- Wipe off any remaining residue with a xylene or toluene-soaked cloth.
- If any coating remains after scraping, apply a second coat.
- Once done, proceed with Paint Stripper
PropOnePropOne Silicone Remover - 200ml [2011]
Code: ORA-108374Brand: PropOneLow Stock — Only 6 LeftRegular price $32.47Sale price $32.47 Regular priceUnit price per- Easy application – Brush on and it will do the rest!
- Reduce dust and noise – Easy removal
- Effectively allows multiple stubborn layers to be removed
- Marine Grade: DCM & NMP free*
-
Free Shipping on $199+Regular price $199.00Sale price $199.00 Regular price $0.00Unit price perIn Stock
More info
- 120ML Primer Base
- 30ML Primer Hardener
- 100ML Clear Topcoat
PropGlide USAPropGlide Prop Running Gear Coating Kit - Small - 250ml [PCK-250]
Code: ORA-88668Brand: PropGlide USAIn StockRegular price $199.00Sale price $199.00 Regular price $0.00Unit price per- 120ML Primer Base
- 30ML Primer Hardener
- 100ML Clear Topcoat
-
Free Shipping on $199+Regular price $149.99Sale price $149.99 Regular price $0.00Unit price perIn Stock
More info
- Pure Power
- Serious Speed
- Unmatched Comfort
- Coverage: 5.4ft² / 0.5m²
- MSprime Dry Time: 10 minutes
- Cure Time: 12 hours (at 20° / 68°F)
- DFT: 97 microns
- 1 x Removal Pad
- 1 x Prep Pad
- 1 x 60ml MSclean
- 1 x 60ml MSprime
- 1 x 60ml Foulfree Clear Coat
- 2 x Brushes
PropspeedPropspeed Foulfree Multi-Surface Coating System - Small [FFKITMS-S]
Code: ORA-112971Brand: PropspeedIn StockRegular price $149.99Sale price $149.99 Regular price $0.00Unit price per- Pure Power
- Serious Speed
- Unmatched Comfort
- Coverage: 5.4ft² / 0.5m²
-
Free Shipping on $199+Regular price $449.99Sale price $449.99 Regular price $0.00Unit price perIn Stock
More info
- Pure Power
- Serious Speed
- Unmatched Comfort
- Coverage: 21.5ft² / 2m²
- MSprime Dry Time: 10 minutes
- Cure Time: 12 hours (at 20° / 68°F)
- DFT: 97 microns
- 1 x Removal Pad
- 1 x Prep Pad
- 1 x 240ml MSclean
- 1 x 240ml MSprime
- 1 x 240ml Foulfree Clear Coat
- 2 x Brushes
PropspeedPropspeed Foulfree Multi-Surface Coating System - Medium [FFKITMS-M]
Code: ORA-112972Brand: PropspeedIn StockRegular price $449.99Sale price $449.99 Regular price $0.00Unit price per- Pure Power
- Serious Speed
- Unmatched Comfort
- Coverage: 21.5ft² / 2m²
-
Free Shipping on $199+Regular price $42.99Sale price $42.99 Regular price $0.00Unit price perIn Stock
More info
- Lightspeed is a transparent coating that is an easy and affordable way for boat owners to reduce maintenance, protect their investment, and maintain lighting system performance
- Don’t risk damage to delicate components caused by scraping away hard marine growth
- Lightspeed also promises worry-free 12-24 months with reduced maintenance
- Lightspeed protects your aesthetic features, while not interfering with the light transmittance
- Endorsed and tested by Lumishore to ensure there is no drop in lumen output, no shift in color nor adverse effects on the lighting system performance
- Coverage Rate - 1ft² (four (4) average size underwater lights)
- Lightclean wipe
- Application brush
- Lightspeed Clear Coat - 15ml
PropspeedPropspeed Lightspeed Light Foul-Release Coating Covers Approximately 4 Lights Underwater Lights [LSKIT]
Code: ORA-105836Brand: PropspeedIn StockRegular price $42.99Sale price $42.99 Regular price $0.00Unit price per- Don’t risk damage to delicate components caused by scraping away hard marine growth
- Lightspeed also promises worry-free 12-24 months with reduced maintenance
- Lightspeed protects your aesthetic features, while not interfering with the light transmittance
- Endorsed and tested by Lumishore to ensure there is no drop in lumen output, no shift...
-
Save $180.00
Free Shipping on $199+Regular price $1,679.00Sale price $1,679.00 Regular price $1,859.00Unit price perSale: $180.00 offLow Stock — Only 4 Left
More info
- 1x PRO-2 Control Module with Integrated Power Cable
- 2x Submersible Ultrasonic Transducers with 15ft of Cable
- 1x Epoxy Kit
- 1x Printed Installation and Operation Manual
- Voltage: 24V DC
- Average Power Draw: 0.5Ah
- Transducer Strength: 120W
- Cable Length: 15ft per transducer
- Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz)
- No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy.
- Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller.
- Mounting the Controller: The BPS-1 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel.
- The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance.
- Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach.
- Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations.
- Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans.
- Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed.
- Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs.
- Diver Savings: Reduces the need for monthly hull cleaning services.
- Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders.
- Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required.
BPS MarineBPS Marine PRO-2 2-Transducer Ultrasonic Antifouling System - 24VDC [24V-PRO-2]
Code: ORA-112023Brand: BPS MarineLow Stock — Only 4 LeftRegular price $1,679.00Sale price $1,679.00 Regular price $1,859.00Unit price perSale: $180.00 off- 1x PRO-2 Control Module with Integrated Power Cable
- 2x Submersible Ultrasonic Transducers with 15ft of Cable
- 1x Epoxy Kit
- 1x Printed Installation and Operation Manual
-
Save $210.00
Free Shipping on $199+Regular price $1,889.00Sale price $1,889.00 Regular price $2,099.00Unit price perSale: $210.00 offLow Stock — Only 8 Left
More info
- 1x BPS-4 Control Module with Integrated Power Cable
- 4x Submersible Ultrasonic Transducers with 15ft of Cable
- 2x Additional 15ft Extension Cables
- 1x Epoxy Kit
- 1x Printed Installation and Operation Manual
- Voltage: 12V or 24V DC
- Average Power Draw: 1Ah
- Transducer Strength: 60W
- Cable Length: 15ft per transducer
- Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz)
- No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy.
- Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller.
- Mounting the Controller: The BPS-1 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel.
- The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance.
- Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach.
- Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations.
- Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans.
- Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed.
- Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs.
- Diver Savings: Reduces the need for monthly hull cleaning services.
- Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders.
- Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required.
BPS MarineBPS Marine BPS-4 4-Transducer Ultrasonic Antifouling System - 12VDC [BPS-4]
Code: ORA-112020Brand: BPS MarineLow Stock — Only 8 LeftRegular price $1,889.00Sale price $1,889.00 Regular price $2,099.00Unit price perSale: $210.00 off- 1x BPS-4 Control Module with Integrated Power Cable
- 4x Submersible Ultrasonic Transducers with 15ft of Cable
- 2x Additional 15ft Extension Cables
- 1x Epoxy Kit
-
Save $275.00
Free Shipping on $199+Regular price $2,624.00Sale price $2,624.00 Regular price $2,899.00Unit price perSale: $275.00 offLow Stock — Only 6 Left
More info
- 1x BPS-6 Control Module with Integrated Power Cable
- 6x Submersible Ultrasonic Transducers with 15ft of Cable
- 3x Additional 15ft Extension Cables
- 2x Epoxy Kits
- 1x Printed Installation and Operation Manual
- Voltage: 12V or 24V DC
- Average Power Draw: 1.5Ah
- Transducer Strength: 60W
- Cable Length: 15ft per transducer
- Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz)
- No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy.
- Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller.
- Mounting the Controller: The BPS-1 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel.
- The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance.
- Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach.
- Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations.
- Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans.
- Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed.
- Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs.
- Diver Savings: Reduces the need for monthly hull cleaning services.
- Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders.
- Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required.
BPS MarineBPS Marine BPS-6 6-Transducer Ultrasonic Antifouling System - 12VDC
Code: ORA-112021Brand: BPS MarineLow Stock — Only 6 LeftRegular price $2,624.00Sale price $2,624.00 Regular price $2,899.00Unit price perSale: $275.00 off- 1x BPS-6 Control Module with Integrated Power Cable
- 6x Submersible Ultrasonic Transducers with 15ft of Cable
- 3x Additional 15ft Extension Cables
- 2x Epoxy Kits
-
Save $410.00
Free Shipping on $199+Regular price $3,989.00Sale price $3,989.00 Regular price $4,399.00Unit price perSale: $410.00 offLow Stock — Only 3 Left
More info
- 1x BPS-8 Control Module with Integrated Power Cable
- 8x Submersible Ultrasonic Transducers with 15ft of Cable
- 4x Additional 15ft Extension Cables
- 2x Epoxy Kits
- 1x Printed Installation and Operation Manual
- Voltage: 12V & 24V DC
- Average Power Draw: 2Ah
- Transducer Strength: 60W
- Cable Length: 15ft per transducer
- Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz)
- No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy.
- Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller.
- Mounting the Controller: The BPS-1 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel.
- The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance.
- Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach.
- Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations.
- Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans.
- Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed.
- Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs.
- Diver Savings: Reduces the need for monthly hull cleaning services.
- Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders.
- Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required.
BPS MarineBPS Marine PRO-8 8-Transducer Ultrasonic Antifouling System - 24VDC
Code: ORA-112026Brand: BPS MarineLow Stock — Only 3 LeftRegular price $3,989.00Sale price $3,989.00 Regular price $4,399.00Unit price perSale: $410.00 off- 1x BPS-8 Control Module with Integrated Power Cable
- 8x Submersible Ultrasonic Transducers with 15ft of Cable
- 4x Additional 15ft Extension Cables
- 2x Epoxy Kits
-
Save $105.00
Free Shipping on $199+Regular price $944.00Sale price $944.00 Regular price $1,049.00Unit price perSale: $105.00 offLow Stock — Only 9 Left
More info
- 1x BPS-2 Control Module with Integrated Power Cable
- 2x Submersible Ultrasonic Transducers with 15ft of Cable
- 1x Epoxy Kit
- 1x Printed Installation and Operation Manual
- Voltage: 12V or 24V DC
- Average Power Draw: 0.5Ah
- Transducer Strength: 60W
- Cable Length: 15ft per transducer
- Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz)
- No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy.
- Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller.
- Mounting the Controller: The BPS-1 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel.
- The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance.
- Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach.
- Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations.
- Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans.
- Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed.
- Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs.
- Diver Savings: Reduces the need for monthly hull cleaning services.
- Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders.
- Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required.
BPS MarineBPS Marine BPS-2 2-Transducer Ultrasonic Antifouling System - 12VDC
Code: ORA-112019Brand: BPS MarineLow Stock — Only 9 LeftRegular price $944.00Sale price $944.00 Regular price $1,049.00Unit price perSale: $105.00 off- 1x BPS-2 Control Module with Integrated Power Cable
- 2x Submersible Ultrasonic Transducers with 15ft of Cable
- 1x Epoxy Kit
- 1x Printed Installation and Operation Manual
-
Save $275.00
Free Shipping on $199+Regular price $2,624.00Sale price $2,624.00 Regular price $2,899.00Unit price perSale: $275.00 offLow Stock — Only 4 Left
More info
- 1x PRO-4 Control Module with Integrated Power Cable
- 4x Submersible Ultrasonic Transducers with 15ft of Cable
- 2x Additional 15ft Extension Cables
- 1x Epoxy Kit
- 1x Printed Installation and Operation Manual
- Voltage: 24V DC
- Average Power Draw: 1Ah
- Transducer Strength: 120W
- Cable Length: 15ft per transducer
- Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz)
- No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy.
- Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller.
- Mounting the Controller: The BPS-1 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel.
- The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance.
- Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach.
- Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations.
- Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans.
- Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed.
- Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs.
- Diver Savings: Reduces the need for monthly hull cleaning services.
- Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders.
- Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required.
BPS MarineBPS Marine PRO-4 4-Transducer Ultrasonic Antifouling System - 24VDC
Code: ORA-112024Brand: BPS MarineLow Stock — Only 4 LeftRegular price $2,624.00Sale price $2,624.00 Regular price $2,899.00Unit price perSale: $275.00 off- 1x PRO-4 Control Module with Integrated Power Cable
- 4x Submersible Ultrasonic Transducers with 15ft of Cable
- 2x Additional 15ft Extension Cables
- 1x Epoxy Kit
-
Save $57.00
Free Shipping on $199+Regular price $472.00Sale price $472.00 Regular price $529.00Unit price perSale: $57.00 offLow Stock — Only 5 Left
More info
- 1x BPS-1 Control Module with Integrated Power Cable
- 1x Submersible Ultrasonic Transducers with 15ft of Cable
- 1x Epoxy Kit
- 1x Printed Installation and Operation Manual
- Voltage: 12V or 24V DC
- Average Power Draw: 0.25Ah
- Transducer Strength: 60W
- Cable Length: 15ft per transducer
- Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz)
- No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy.
- Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller.
- Mounting the Controller: The BPS-1 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel.
- The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance.
- Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach.
- Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations.
- Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans.
- Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed.
- Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs.
- Diver Savings: Reduces the need for monthly hull cleaning services.
- Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders.
- Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required.
BPS MarineBPS Marine BPS-1 1-Transducer Ultrasonic Antifouling System - 12VDC
Code: ORA-112018Brand: BPS MarineLow Stock — Only 5 LeftRegular price $472.00Sale price $472.00 Regular price $529.00Unit price perSale: $57.00 off- 1x BPS-1 Control Module with Integrated Power Cable
- 1x Submersible Ultrasonic Transducers with 15ft of Cable
- 1x Epoxy Kit
- 1x Printed Installation and Operation Manual
-
PropOne
PropOne Primer - 240ml [2041]
Save $0.76
Free Shipping on $199+Regular price $83.99Sale price $83.99 Regular price $84.75Unit price perSale: $0.76 offLow Stock — Only 3 Left
More info
Primer - 240mlPart of a two-component 4:1 etching primer. Once mixed with the PropOne Activator, the Primer chemically dries to protect metallic surfaces against corrosion and allow adhesion of the PropOne Clear Coat. Suitable for ferrous & non-ferrous metals.NOTE: This product is the PropOne Primer only. Other components are sold...PropOnePropOne Primer - 240ml [2041]
Code: ORA-108378Brand: PropOneLow Stock — Only 3 LeftRegular price $83.99Sale price $83.99 Regular price $84.75Unit price perSale: $0.76 offPrimer - 240mlPart of a two-component 4:1 etching primer. Once mixed with the PropOne Activator, the Primer chemically dries to...
-
PropOne
PropOne Kit - 250ml [2050]
Free Shipping on $199+Regular price $189.95Sale price $189.95 Regular price $0.00Unit price perIn Stock
More info
- Most popular with DIY users
- Coverage: 2 x 24 inch propellers
- 1 x 120mL Primer Coat
- 1 x 30mL Primer Activator
- 1 x 100mL Clear Coat
- 1 x Prop Wash Wipe
- 1 x Stirring Stick
PropOnePropOne Kit - 250ml [2050]
Code: ORA-108372Brand: PropOneIn StockRegular price $189.95Sale price $189.95 Regular price $0.00Unit price per- Most popular with DIY users
- Coverage: 2 x 24 inch propellers
- 1 x 120mL Primer Coat
- 1 x 30mL Primer Activator
-
PropOne
PropOne Kit - 1 Litre [2044]
Free Shipping on $199+Regular price $505.95Sale price $505.95 Regular price $0.00Unit price perLow Stock — Only 6 Left
More info
- Most popular with our professional applicators
- Coverage: 2 x 48-inch propellers and running gear
- 2 x 240mL Primer Coat
- 2 x 60mL Primer Activator
- 1 x 400mL Clear Coat
- 4 x Prop Wash Wipes
- 2 x Stirring Sticks
PropOnePropOne Kit - 1 Litre [2044]
Code: ORA-108370Brand: PropOneLow Stock — Only 6 LeftRegular price $505.95Sale price $505.95 Regular price $0.00Unit price per- Most popular with our professional applicators
- Coverage: 2 x 48-inch propellers and running gear
- 2 x 240mL Primer Coat
- 2 x 60mL Primer Activator
-
PropOne
PropOne Kit - 500ml [2046]
Free Shipping on $199+Regular price $328.95Sale price $328.95 Regular price $0.00Unit price perLow Stock — Only 4 Left
More info
- Most popular with twin shaft boats
- Coverage: 2 x 36-inch propellers and running gear
- 2 x 120mL Primer Coat
- 2 x 30mL Primer Activator
- 1 x 200mL Clear Coat
- 2 x Prop Wash Wipes
- 2 x Stirring Sticks
PropOnePropOne Kit - 500ml [2046]
Code: ORA-108371Brand: PropOneLow Stock — Only 4 LeftRegular price $328.95Sale price $328.95 Regular price $0.00Unit price per- Most popular with twin shaft boats
- Coverage: 2 x 36-inch propellers and running gear
- 2 x 120mL Primer Coat
- 2 x 30mL Primer Activator
-
Free Shipping on $199+Regular price $55.75Sale price $55.75 Regular price $0.00Unit price perIn Stock
More info
Underwater Light Coating (ULC) 70mlKeep Your Lights Bright and Clean. PropOne ULC is an optically clear, foul-release coating that prevents organisms from adhering strongly to underwater light lenses.With minimal maintenance and a simple, one-coat application process, you’ll spend less time cleaning your lights and more time enjoying them.The ULC can...PropOnePropOne Underwater Light Coating (ULC) 70ml [2059]
Code: ORA-108377Brand: PropOneIn StockRegular price $55.75Sale price $55.75 Regular price $0.00Unit price perUnderwater Light Coating (ULC) 70mlKeep Your Lights Bright and Clean. PropOne ULC is an optically clear, foul-release coating that prevents...
-
Free Shipping on $199+Regular price $349.11Sale price $349.11 Regular priceUnit price perLow Stock — Only 3 Left
More info
Clear Coat - 400mlPropOne Clear Coat is part of the PropOne System. The Clear Coat is a non-biocidal, low surface energy coating which prevents organisms from strongly adhering to the surface of the propeller and running gear components permanently immersed in water. The Clear Coat does not prevent marine growth...PropOnePropOne Clear Coat - 400ml [2053]
Code: ORA-108380Brand: PropOneLow Stock — Only 3 LeftRegular price $349.11Sale price $349.11 Regular priceUnit price perClear Coat - 400mlPropOne Clear Coat is part of the PropOne System. The Clear Coat is a non-biocidal, low surface...
-
PropOne
PropOne Activator - 60ml [2042]
Free Shipping on $199+Regular price $21.35Sale price $21.35 Regular priceUnit price perLow Stock — Only 4 Left
More info
Activator - 60mlPart of a two-component 4:1 etching primer. Once mixed with the PropOne Primer Coat, the Primer chemically dries to protect metallic surfaces against corrosion and allow adhesion of the PropOne Clear Coat. Suitable for ferrous & non-ferrous metals.NOTE: This product is the PropOne Primer Activator only. Other components...PropOnePropOne Activator - 60ml [2042]
Code: ORA-108379Brand: PropOneLow Stock — Only 4 LeftRegular price $21.35Sale price $21.35 Regular priceUnit price perActivator - 60mlPart of a two-component 4:1 etching primer. Once mixed with the PropOne Primer Coat, the Primer chemically dries...
