-
Save $410.00
Free Shipping on $114+Regular price $3,989.00Sale price $3,989.00 Regular price $4,399.00Unit price perSale: $410.00 offLow Stock — Only 2 Left
More info
- 1x BPS-8 Control Module with Integrated Power Cable
- 8x Submersible Ultrasonic Transducers with 15ft of Cable
- 4x Additional 15ft Extension Cables
- 2x Epoxy Kits
- 1x Printed Installation and Operation Manual
- Voltage: 12V & 24V DC
- Average Power Draw: 2Ah
- Transducer Strength: 60W
- Cable Length: 15ft per transducer
- Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz)
- No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy.
- Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller.
- Mounting the Controller: The BPS-1 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel.
- The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance.
- Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach.
- Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations.
- Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans.
- Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed.
- Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs.
- Diver Savings: Reduces the need for monthly hull cleaning services.
- Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders.
- Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required.
BPS MarineBPS Marine PRO-8 8-Transducer Ultrasonic Antifouling System - 24VDC
Code: ORA-112026Brand: BPS MarineLow Stock — Only 2 LeftRegular price $3,989.00Sale price $3,989.00 Regular price $4,399.00Unit price perSale: $410.00 off- 1x BPS-8 Control Module with Integrated Power Cable
- 8x Submersible Ultrasonic Transducers with 15ft of Cable
- 4x Additional 15ft Extension Cables
- 2x Epoxy Kits
-
Save $350.00
Free Shipping on $114+Regular price $3,149.00Sale price $3,149.00 Regular price $3,499.00Unit price perSale: $350.00 offLow Stock — Only 4 Left
More info
- 1x PRO-6 Control Module with Integrated Power Cable
- 6x Submersible Ultrasonic Transducers with 15ft of Cable
- 3x Additional 15ft Extension Cables
- 2x Epoxy Kits
- 1x Printed Installation and Operation Manual
- Voltage: 24V DC
- Average Power Draw: 1.5Ah
- Transducer Strength: 120W
- Cable Length: 15ft per transducer
- Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz)
- No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy.
- Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller.
- Mounting the Controller: The BPS-1 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel.
- The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance.
- Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach.
- Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations.
- Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans.
- Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed.
- Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs.
- Diver Savings: Reduces the need for monthly hull cleaning services.
- Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders.
- Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required.
BPS MarineBPS Marine PRO-6 6-Transducer Ultrasonic Antifouling System - 24VDC [24V-PRO-6]
Code: ORA-112025Brand: BPS MarineLow Stock — Only 4 LeftRegular price $3,149.00Sale price $3,149.00 Regular price $3,499.00Unit price perSale: $350.00 off- 1x PRO-6 Control Module with Integrated Power Cable
- 6x Submersible Ultrasonic Transducers with 15ft of Cable
- 3x Additional 15ft Extension Cables
- 2x Epoxy Kits
-
Save $275.00
Free Shipping on $114+Regular price $2,624.00Sale price $2,624.00 Regular price $2,899.00Unit price perSale: $275.00 offLow Stock — Only 4 Left
More info
- 1x PRO-4 Control Module with Integrated Power Cable
- 4x Submersible Ultrasonic Transducers with 15ft of Cable
- 2x Additional 15ft Extension Cables
- 1x Epoxy Kit
- 1x Printed Installation and Operation Manual
- Voltage: 24V DC
- Average Power Draw: 1Ah
- Transducer Strength: 120W
- Cable Length: 15ft per transducer
- Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz)
- No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy.
- Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller.
- Mounting the Controller: The BPS-1 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel.
- The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance.
- Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach.
- Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations.
- Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans.
- Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed.
- Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs.
- Diver Savings: Reduces the need for monthly hull cleaning services.
- Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders.
- Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required.
BPS MarineBPS Marine PRO-4 4-Transducer Ultrasonic Antifouling System - 24VDC
Code: ORA-112024Brand: BPS MarineLow Stock — Only 4 LeftRegular price $2,624.00Sale price $2,624.00 Regular price $2,899.00Unit price perSale: $275.00 off- 1x PRO-4 Control Module with Integrated Power Cable
- 4x Submersible Ultrasonic Transducers with 15ft of Cable
- 2x Additional 15ft Extension Cables
- 1x Epoxy Kit
-
Save $180.00
Free Shipping on $114+Regular price $1,679.00Sale price $1,679.00 Regular price $1,859.00Unit price perSale: $180.00 offLow Stock — Only 4 Left
More info
- 1x PRO-2 Control Module with Integrated Power Cable
- 2x Submersible Ultrasonic Transducers with 15ft of Cable
- 1x Epoxy Kit
- 1x Printed Installation and Operation Manual
- Voltage: 24V DC
- Average Power Draw: 0.5Ah
- Transducer Strength: 120W
- Cable Length: 15ft per transducer
- Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz)
- No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy.
- Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller.
- Mounting the Controller: The BPS-1 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel.
- The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance.
- Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach.
- Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations.
- Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans.
- Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed.
- Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs.
- Diver Savings: Reduces the need for monthly hull cleaning services.
- Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders.
- Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required.
BPS MarineBPS Marine PRO-2 2-Transducer Ultrasonic Antifouling System - 24VDC [24V-PRO-2]
Code: ORA-112023Brand: BPS MarineLow Stock — Only 4 LeftRegular price $1,679.00Sale price $1,679.00 Regular price $1,859.00Unit price perSale: $180.00 off- 1x PRO-2 Control Module with Integrated Power Cable
- 2x Submersible Ultrasonic Transducers with 15ft of Cable
- 1x Epoxy Kit
- 1x Printed Installation and Operation Manual
-
Save $340.00
Free Shipping on $114+Regular price $3,359.00Sale price $3,359.00 Regular price $3,699.00Unit price perSale: $340.00 offLow Stock — Only 4 Left
More info
- 1x BPS-8 Control Module with Integrated Power Cable
- 8x Submersible Ultrasonic Transducers with 15ft of Cable
- 4x Additional 15ft Extension Cables
- 2x Epoxy Kits
- 1x Printed Installation and Operation Manual
- Voltage: 12V or 24V DC
- Average Power Draw: 2Ah
- Transducer Strength: 60W
- Cable Length: 15ft per transducer
- Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz)
- No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy.
- Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller.
- Mounting the Controller: The BPS-1 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel.
- The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance.
- Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach.
- Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations.
- Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans.
- Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed.
- Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs.
- Diver Savings: Reduces the need for monthly hull cleaning services.
- Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders.
- Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required.
BPS MarineBPS Marine BPS-8 8-Transducer Ultrasonic Antifouling System - 12VDC [BPS-8]
Code: ORA-112022Brand: BPS MarineLow Stock — Only 4 LeftRegular price $3,359.00Sale price $3,359.00 Regular price $3,699.00Unit price perSale: $340.00 off- 1x BPS-8 Control Module with Integrated Power Cable
- 8x Submersible Ultrasonic Transducers with 15ft of Cable
- 4x Additional 15ft Extension Cables
- 2x Epoxy Kits
-
Save $275.00
Free Shipping on $114+Regular price $2,624.00Sale price $2,624.00 Regular price $2,899.00Unit price perSale: $275.00 offLow Stock — Only 6 Left
More info
- 1x BPS-6 Control Module with Integrated Power Cable
- 6x Submersible Ultrasonic Transducers with 15ft of Cable
- 3x Additional 15ft Extension Cables
- 2x Epoxy Kits
- 1x Printed Installation and Operation Manual
- Voltage: 12V or 24V DC
- Average Power Draw: 1.5Ah
- Transducer Strength: 60W
- Cable Length: 15ft per transducer
- Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz)
- No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy.
- Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller.
- Mounting the Controller: The BPS-1 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel.
- The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance.
- Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach.
- Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations.
- Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans.
- Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed.
- Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs.
- Diver Savings: Reduces the need for monthly hull cleaning services.
- Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders.
- Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required.
BPS MarineBPS Marine BPS-6 6-Transducer Ultrasonic Antifouling System - 12VDC
Code: ORA-112021Brand: BPS MarineLow Stock — Only 6 LeftRegular price $2,624.00Sale price $2,624.00 Regular price $2,899.00Unit price perSale: $275.00 off- 1x BPS-6 Control Module with Integrated Power Cable
- 6x Submersible Ultrasonic Transducers with 15ft of Cable
- 3x Additional 15ft Extension Cables
- 2x Epoxy Kits
-
Save $210.00
Free Shipping on $114+Regular price $1,889.00Sale price $1,889.00 Regular price $2,099.00Unit price perSale: $210.00 offLow Stock — Only 8 Left
More info
- 1x BPS-4 Control Module with Integrated Power Cable
- 4x Submersible Ultrasonic Transducers with 15ft of Cable
- 2x Additional 15ft Extension Cables
- 1x Epoxy Kit
- 1x Printed Installation and Operation Manual
- Voltage: 12V or 24V DC
- Average Power Draw: 1Ah
- Transducer Strength: 60W
- Cable Length: 15ft per transducer
- Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz)
- No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy.
- Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller.
- Mounting the Controller: The BPS-1 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel.
- The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance.
- Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach.
- Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations.
- Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans.
- Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed.
- Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs.
- Diver Savings: Reduces the need for monthly hull cleaning services.
- Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders.
- Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required.
BPS MarineBPS Marine BPS-4 4-Transducer Ultrasonic Antifouling System - 12VDC [BPS-4]
Code: ORA-112020Brand: BPS MarineLow Stock — Only 8 LeftRegular price $1,889.00Sale price $1,889.00 Regular price $2,099.00Unit price perSale: $210.00 off- 1x BPS-4 Control Module with Integrated Power Cable
- 4x Submersible Ultrasonic Transducers with 15ft of Cable
- 2x Additional 15ft Extension Cables
- 1x Epoxy Kit
-
Save $105.00
Free Shipping on $114+Regular price $944.00Sale price $944.00 Regular price $1,049.00Unit price perSale: $105.00 offLow Stock — Only 2 Left
More info
- 1x BPS-2 Control Module with Integrated Power Cable
- 2x Submersible Ultrasonic Transducers with 15ft of Cable
- 1x Epoxy Kit
- 1x Printed Installation and Operation Manual
- Voltage: 12V or 24V DC
- Average Power Draw: 0.5Ah
- Transducer Strength: 60W
- Cable Length: 15ft per transducer
- Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz)
- No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy.
- Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller.
- Mounting the Controller: The BPS-1 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel.
- The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance.
- Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach.
- Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations.
- Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans.
- Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed.
- Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs.
- Diver Savings: Reduces the need for monthly hull cleaning services.
- Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders.
- Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required.
BPS MarineBPS Marine BPS-2 2-Transducer Ultrasonic Antifouling System - 12VDC
Code: ORA-112019Brand: BPS MarineLow Stock — Only 2 LeftRegular price $944.00Sale price $944.00 Regular price $1,049.00Unit price perSale: $105.00 off- 1x BPS-2 Control Module with Integrated Power Cable
- 2x Submersible Ultrasonic Transducers with 15ft of Cable
- 1x Epoxy Kit
- 1x Printed Installation and Operation Manual
-
Save $57.00
Free Shipping on $114+Regular price $472.00Sale price $472.00 Regular price $529.00Unit price perSale: $57.00 offLow Stock — Only 3 Left
More info
- 1x BPS-1 Control Module with Integrated Power Cable
- 1x Submersible Ultrasonic Transducers with 15ft of Cable
- 1x Epoxy Kit
- 1x Printed Installation and Operation Manual
- Voltage: 12V or 24V DC
- Average Power Draw: 0.25Ah
- Transducer Strength: 60W
- Cable Length: 15ft per transducer
- Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz)
- No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy.
- Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller.
- Mounting the Controller: The BPS-1 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel.
- The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance.
- Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach.
- Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations.
- Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans.
- Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed.
- Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs.
- Diver Savings: Reduces the need for monthly hull cleaning services.
- Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders.
- Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required.
BPS MarineBPS Marine BPS-1 1-Transducer Ultrasonic Antifouling System - 12VDC
Code: ORA-112018Brand: BPS MarineLow Stock — Only 3 LeftRegular price $472.00Sale price $472.00 Regular price $529.00Unit price perSale: $57.00 off- 1x BPS-1 Control Module with Integrated Power Cable
- 1x Submersible Ultrasonic Transducers with 15ft of Cable
- 1x Epoxy Kit
- 1x Printed Installation and Operation Manual
