Kicker KMC2 Gauge-Style Marine Stereo with Bluetooth (46KMC2)

Short on dash space? The KMC2 fits a standard 3-inch gauge opening. That makes it one of the simplest ways to add Bluetooth music to a boat, golf cart, UTV or jet-boat dash without cutting a big DIN hole.

It's IP67-rated, so spray and rain at the helm aren't a problem, and the screen is easy to read in sunlight. You can stream over Bluetooth (about 30-foot range), play or charge from USB, plug in an RCA source, or tune AM/FM. Built-in power is 25 watts x 4. When you're ready for more, the preamp RCA outputs connect directly to a Kicker marine amp such as the KMA360.4.

You can add the wired KRC12 Remote Commander for control from the stern or the tower.

Best for: small boats, pontoons, center consoles, side-by-sides and anyone replacing a worn-out gauge-style receiver.

Key Specs

• Fits 3" (7.6 cm) gauge hole; trim ring 4.4"; 1.25" protrusion
• Required depth for wiring: 4.7"
• Power: 25W x 4 @ 4Ω (14.4V)
• Sources: Bluetooth (30 ft), USB playback/charging, RCA in, AM/FM
• IP67 rated
• 1 set of preamp RCA outputs (2.5V)
• KRC12 wired remote compatible
• 3-year Kicker warranty

FAQ

Will the KMC2 fit my gauge hole?

It needs a 3" mounting hole and about 4.7" of depth behind the panel for wiring.

KMC2 vs KMC3, what is the difference?

Both are gauge-style. Compare the full specs on each product page; the KMC3 adds features over the KMC2.

Can I add an amplifier?

Yes. Use the preamp RCA outputs to feed a Kicker KMA-series marine amp.

Why Buy from Ocean Rock Audio

Ocean Rock Audio is South Florida's Kicker marine boat speaker specialist and an authorized Kicker dealer, so your purchase carries the full Kicker manufacturer warranty. Tell us your boat and we'll help you match speakers, subs and amps before you order.